MCP6L92T-E/MS

MCP6L92T-E/MS is Microchip’s low‑power, rail‑to‑rail input/output operational amplifier (op‑amp) in the MCP6L92 family. It is designed for single‑supply use in portable and battery‑powered systems and sensor front‑ends. Key strengths include RRIO, low quiescent current, and unity‑gain stability, making it suitable for buffering, signal amplification, and filtering near ground with minimal power. The device comes in an 8‑pin package; the -MS suffix denotes Tape‑and‑Reel packaging for automated assembly, while -E indicates a RoHS‑compliant variant (extended temperature range may apply depending on the lot). Typical applications include sensor interfaces, ADC/DAC front‑ends, and general low‑power amplification tasks. For full electrical specs and recommended configurations, consult the datasheet.

There’s no guaranteed drop‑in equivalent. Close alternatives (similar single‑supply, rail‑to‑rail I/O, low‑power op‑amps) include: Microchip MCP6021/MCP6022, TI TLV2371/TLV2372, TI OPA320/OPA2320, Analog Devices AD8606/AD8607. Verify pinout, supply range, input/output swing, gain‑bandwidth and offset before substituting.

Here are the typical features of the MCP6L92T-E/MS (dual op-amps in MSOP package; extended temp grade):
- Dual rail-to-rail input/output (RRIO) operational amplifiers
- Single-supply operation from 1.8 V up to 5.5 V
- Ultra-low quiescent current per amplifier
- Unity-gain stability; suitable for buffering, filtering, and amplification
- Low input offset voltage and low input bias current; low noise
- Wide input common-mode range including ground
- Short-circuit and overload protection (robust under fault conditions)
- Extended temperature range (-40°C to +125°C)
- Packaging: RoHS-compliant MSOP-8 (-MS) with -E indicating extended temp grade
Note: please consult the datasheet for exact electrical specifications and tolerance.

Pin count: 6 pins (SOT‑23‑6 package).
Function: MCP6L92T‑E/MS is a single‑supply, single‑channel operational amplifier with rail‑to‑rail input and output, intended for general signal conditioning, buffering and amplification. The "T‑E/MS" suffix denotes Microchip tape‑and‑reel packaging for the SOT‑23‑6.

- Manufacturer: Microchip Technology Inc.
- What kind of company: A multinational American semiconductor company that designs and manufactures microcontrollers, analog/mixed-signal ICs, memory, and other semiconductor devices.

Application areas for MCP6L92T-E/MS (low-power, rail-to-rail input/output op-amp):
- Sensor signal conditioning and buffering (strain gauges, RTDs/thermistors, photodiodes)
- ADC front-end buffering and active filtering
- Transimpedance amplification for optical/photodiode sensors
- Portable and battery-powered instrumentation (low quiescent current)
- Medical and consumer electronics requiring low offset and rail-to-rail I/O
- Automotive/industrial sensor interfaces in single-supply systems
Note: Suitable for compact, single-supply amplification and front-end tasks in compact devices.

MSOP-8 (8-pin MSOP) package.