MX25U6435FBBI-10G

Imagens apenas para referência

MX25U6435FBBI-10G

+Lista de Materiais

IC FLASH 64MBIT SPI/QUAD 12WLCSP

  • FabricanteMacronix

  • Peça do Fabricante #MX25U6435FBBI-10G

  • Em Estoque2234

365 Garantia de Qualidade em 1 dia

7*24 Garantia de serviço em 24 horas

90-Garantia de pós-venda em 1 dia

Garantia de Produto Genuíno

Especificações

Atributo Valor
Series MX25xxx35/36 - MXSMIO™
PartStatus Not For New Designs
BaseProductNumber MX25U6435
DigiKeyProgrammable Not Verified
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NOR
MemorySize 64Mbit
MemoryOrganization 8M x 8
MemoryInterface SPI - Quad I/O
ClockFrequency 104 MHz
WriteCycleTime-Word,Page 30µs, 3ms
Voltage-Supply 1.65V ~ 2V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
SupplierDevicePackage 12-WLCSP
Packaging Tape & Reel (TR)

Visão Geral

Description

MX25U6435FBBI-10G is Macronix’s 64-Mbit serial NOR flash memory. It uses a high-speed SPI family interface with support for SPI, Dual SPI, Quad I/O, and QPI modes for fast reads. The device operates from 2.7–3.6 V and stores 8 MB of data. It features 256-byte pages, 4 KB sectors, and 32/64 KB blocks, with standard page-program, sector/block erase, and chip-erase operations. Optional features include Deep Power-Down/Release and security options. Packaging is an 8-pin device (BBI code). Typical applications are firmware and data storage for microcontrollers and embedded systems, bootloaders, and code updates. For exact timing, endurance, and electrical characteristics, refer to the MX25U6435FBBI-10G datasheet.

Equivalent

Equivalent parts (64Mbit SPI serial flash, 8-pin, 3.3V, similar timing):
- Winbond W25Q64FVSSIG / W25Q64JVSSIG
- GigaDevice GD25Q64CSIG
- ISSI IS25LP064A
- Micron N25Q64A11
- SST SST25VF064C
- Puya P25Q64HIG
Note: voltage, speed (e.g., up to ~104 MHz), and package must match your design; check datasheets for exact similarities.

Features

Here are the core features of MX25U6435FBBI-10G:
- 64 Mbit (8 MB) serial NOR flash memory.
- Supply voltage: 2.7–3.6 V; industrial temperature range (-40 to 85°C).
- Interfaces: Standard SPI, Dual SPI, and Quad SPI I/O (with QPI capable modes).
- Page program: 256-byte page size. Read operations include fast/continuous reads.
- Erase architecture: 4 KB sectors; 32 KB and 64 KB blocks; chip erase option available.
- Endurance and retention: typically about 100k program/erase cycles per sector; data retention ~20 years at 25°C.
- Power and performance: Deep power-down mode; wake/reset features; high-speed read modes in supported configurations.
- Security and protection: Write Enable Latch; status and configuration registers; block protection (BP) bits; Quad Enable (QE) for quad I/O modes; WP/HOLD control pins.
Note: Exact timings and supported mode sets vary by device revision and configuration.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOP8).
- Function: 64-Mbit serial NOR flash memory with SPI interface. Key pins: VCC, GND, CS (active low), SCK, SI (data in/MOSI), SO (data out/MISO), WP (write protect), HOLD (pause). Used for non-volatile storage in embedded systems.

Manufacturer

- Manufacturer: Macronix International Co., Ltd. (MXIC)
- What kind of company: A Taiwanese semiconductor company that designs and manufactures non-volatile memory products (NOR/NAND flash, EEPROM, and related memory ICs).

Application

MX25U6435FBBI-10G is a 64-Mbit serial NOR flash used across many embedded systems. Typical applications include:
- Boot memory and firmware storage for microcontrollers and SoCs
- Firmware updates and OTA staging in IoT and consumer electronics
- External non-volatile storage for code, LUTs/calibration data
- Automotive ECUs and instrument clusters
- Networking/telecom equipment and industrial controllers
- FPGA/ASIC configuration bitstreams
- Data logging and parameter storage
- Secure storage for keys/credentials (with built-in security features)
Concise, reliable external flash for code and data in diverse devices.

Package

8-pin SOP (SOIC) package.

Frequently Asked Questions


Q: What is the memory density of the MX25U6435FBBI-10G?
A: It has a 64Mbit (8M x 8) capacity, suitable for code shadowing and data storage in embedded systems.


Q: Does this chip support high-speed SPI operation?
A: Yes, it supports a clock frequency up to 104 MHz in Quad I/O mode, enabling fast data transfer for NOR flash.


Q: What voltage range does this flash memory require?
A: It operates from 1.65V to 2V, making it ideal for low-power and battery-operated designs.


Q: What is the typical write cycle time per page?
A: The page write time is approximately 3ms, with a word write cycle of 30μs, ensuring efficient programming.


Q: Is this component suitable for industrial temperature ranges?
A: Yes, it operates from -40°C to 85°C, covering standard industrial and commercial applications.


Q: What package type is available for the MX25U6435FBBI-10G?
A: It comes in a 12-ball WLCSP (Wafer-Level Chip Scale Package) for space-constrained designs.


Q: Can this memory be used for reliable code execution?
A: Yes, as a NOR Flash with Quad SPI interface, it supports fast random read for execute-in-place (XIP) applications.


Produtos relacionados a MX25U6435FBBI-10G

  • Orçamento Rápido

  • Envie sua solicitação de orçamento para MX25U6435FBBI-10G Use este formulário. Responderemos em até 12 horas.