Imagens apenas para referência
MX30LF1GE8AB-XKI
+Lista de MateriaisIC FLASH 1GBIT PARALLEL 63VFBGA
-
FabricanteMacronix
-
Peça do Fabricante #MX30LF1GE8AB-XKI
-
Em Estoque5540
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Series | MX30LF |
| Part Status | Active |
| Base Product Number | MX30LF1 |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NAND |
| Memory Size | 1Gbit |
| Memory Organization | 128M x 8 |
| Memory Interface | Parallel |
| Write Cycle Time - Word, Page | 20ns |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package | 63-VFBGA |
| Supplier Device Package | 63-VFBGA (9x11) |
| Packaging | Tray |
| Access Time | 20 ns |
Visão Geral
Description
Key points:
- Density: 1 Gbit (128 MB effective)
- Voltage: typically 2.7–3.6 V
- Interface: SPI, with dual/quad I/O options
- Organization: 256-byte page programming; 4 KB sectors; 64 KB blocks
- Features: fast read, deep power-down, read/write protection blocks, security features
- Endurance/retention: tens of thousands of P/E cycles (typical ~100k), data retention ~20+ years
- Package: 8-pin, XKI suffix indicates specific packaging/industrial temperature options
Typical use: code and data storage in microcontrollers and SoCs, firmware updates, and XIP (execute in place). For exact timings, voltage specs, and supported modes, consult the latest datasheet.
Equivalent
- Winbond W25Q128FV/W25Q128JV
- GigaDevice GD25Q128C/B
- ISSI IS25WP128D
- Macronix MX25L128F/MX25U128F
- Puya P25Q128H
Note: exact part depends on package, voltage (1.8V/3.3V), timing, and temperature range.
Features
- Density: 1 Gbit (128 MB) serial NOR flash
- Interface: SPI with Dual/Quad I/O and QPI modes for high throughput
- Voltage: 1.65–3.6 V operation
- Speed: Standard read up to 104 MHz; Quad/Dual I/O and QPI faster reads (rates vary by mode)
- Organization: 256-byte page size; erase units: 4 KB sectors; 32 KB and 64 KB blocks
- Features: Deep power-down, wake/resume from DP, fast/continuous read capability
- Security/Protection: hardware and software write protection; block-protection (BP) registers; optional OTP area
- Endurance/Retention: typical 100,000 P/E cycles; data retention ~20 years
- Temperature: industrial variants available (datasheet specifies exact range)
- Package: 8-pin package (suffix XKI)
Note: See the datasheet for exact timing, voltage, and protection details for your configuration.
Pinout
Pinout (typical SPI serial flash):
- Pin 1: CS# (Chip Select)
- Pin 2: SO / MISO (Serial Output)
- Pin 3: WP# (Write Protect, active-low)
- Pin 4: GND
- Pin 5: SI / MOSI (Serial Input)
- Pin 6: SCK (Serial Clock)
- Pin 7: HOLD# (Hold, active-low)
- Pin 8: VCC (Power)
Note: WP# and HOLD# are active-low; refer to the datasheet for exact package orientation and any variant-specific differences.
Manufacturer
What kind of company: A Taiwan-based semiconductor company that designs, develops, and manufactures memory devices (notably NOR flash and other non-volatile memories). It is an integrated device manufacturer (IDM) with in-house wafer fabrication.
Application
- MCU/SoC boot code and program storage
- Firmware updates and recovery
- Data logging and small-file storage in industrial, automotive, and consumer devices
- Automotive ECUs and infotainment modules
- Industrial controllers and networking equipment
- Consumer electronics (set-top boxes, cameras, printers)
- IoT devices, gateways, wearables, and smart meters
Consolidates code and data storage needs across embedded platforms.
Package
Frequently Asked Questions
Q: What is the memory technology used in the MX30LF1GE8AB-XKI?
A: It uses FLASH - NAND technology, offering non-volatile data storage.
Q: What is the memory organization and total capacity?
A: Organized as 128M x 8 bits, providing a total memory size of 1 Gbit.
Q: What is the operating voltage range for this NAND flash?
A: It requires a supply voltage of 2.7V to 3.6V for reliable operation.
Q: What is the temperature range for this component?
A: The operating temperature range is -40°C to +85°C (TA), suitable for industrial environments.
Q: What is the memory interface and access time?
A: It features a Parallel interface with an access time of 20 ns.
Q: What is the packaging option for the MX30LF1GE8AB-XKI?
A: It is supplied in a 63-VFBGA (9x11) tray package for surface mount applications.
Q: Is the MX30LF1GE8AB-XKI programmable or pre-programmed?
A: It is not verified as pre-programmed; it supports standard write operations with a 20 ns page write cycle.
