Imagens apenas para referência
NCP51510MNTAG
+Lista de MateriaisIC REG LDO DDR 1OUT 10DFN
-
Fabricanteonsemi
-
Peça do Fabricante #NCP51510MNTAG
-
Ficha Técnica NCP51510MNTAG DataSheet
-
Em Estoque2106
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Part Status | Active |
| Applications | LDO (Linear), DDR |
| Voltage - Input | 2.7V ~ 3.6V |
| Number of Outputs | 1 |
| Voltage - Output | 0.5V ~ 1.5V |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Supplier Device Package | 10-DFN (3x3) |
| Base Product Number | NCP51510 |
Visão Geral
Description
The NCP51510MNTAG is a dual-channel gate driver IC designed for high-performance power applications, particularly in synchronous rectification and power management systems. It features a high-voltage capability, allowing it to drive N-channel MOSFETs efficiently, which is crucial for enhancing power conversion efficiency in applications such as DC-DC converters and motor drives.
Key features include a low propagation delay, high peak output current, and the ability to operate at high switching frequencies, making it suitable for modern power electronics. The device also incorporates an integrated bootstrap circuit, which simplifies the design process by minimizing external component counts.
Additionally, the NCP51510MNTAG supports various fault protection mechanisms, including under-voltage lockout and thermal shutdown, ensuring system reliability. Its compact package and robust performance make it an ideal choice for engineers seeking to optimize power management solutions in compact and energy-efficient designs.
Key features include a low propagation delay, high peak output current, and the ability to operate at high switching frequencies, making it suitable for modern power electronics. The device also incorporates an integrated bootstrap circuit, which simplifies the design process by minimizing external component counts.
Additionally, the NCP51510MNTAG supports various fault protection mechanisms, including under-voltage lockout and thermal shutdown, ensuring system reliability. Its compact package and robust performance make it an ideal choice for engineers seeking to optimize power management solutions in compact and energy-efficient designs.
Equivalent
The NCP51510MNTAG is a high-speed gate driver for power applications. Equivalent products include the MIC4427, IR2110, and LM5113. These alternatives provide similar functionality for driving MOSFETs and IGBTs in various applications. Always check the specific parameters such as voltage ratings, current capacity, and propagation delay to ensure compatibility for your design needs.
Features
The NCP51510MNTAG is a dual-channel gate driver designed for high-performance power management applications. Key features include:
1. High Voltage Capability: Supports operation up to 100V, suitable for various power applications.
2. Dual Channels: Provides independent control for high-side and low-side MOSFETs, enhancing flexibility in designs.
3. Fast Switching: Delivers fast rise and fall times, reducing switching losses and improving overall efficiency.
4. Integrated Bootstrap Charge Pump: Simplifies circuit design by providing the necessary bootstrap voltage for high-side driving.
5. Adaptive Shoot-Through Protection: Prevents simultaneous conduction of high-side and low-side switches, enhancing reliability.
6. Low Quiescent Current: Minimizes power consumption during idle states, ideal for energy-efficient designs.
7. Thermal Shut Down: Protects the device from overheating, ensuring safe operation under high-load conditions.
8. Wide Operating Temperature Range: Suitable for harsh environments, with operation typically from -40°C to +125°C.
These features make the NCP51510MNTAG an excellent choice for applications such as DC-DC converters and motor drivers.
1. High Voltage Capability: Supports operation up to 100V, suitable for various power applications.
2. Dual Channels: Provides independent control for high-side and low-side MOSFETs, enhancing flexibility in designs.
3. Fast Switching: Delivers fast rise and fall times, reducing switching losses and improving overall efficiency.
4. Integrated Bootstrap Charge Pump: Simplifies circuit design by providing the necessary bootstrap voltage for high-side driving.
5. Adaptive Shoot-Through Protection: Prevents simultaneous conduction of high-side and low-side switches, enhancing reliability.
6. Low Quiescent Current: Minimizes power consumption during idle states, ideal for energy-efficient designs.
7. Thermal Shut Down: Protects the device from overheating, ensuring safe operation under high-load conditions.
8. Wide Operating Temperature Range: Suitable for harsh environments, with operation typically from -40°C to +125°C.
These features make the NCP51510MNTAG an excellent choice for applications such as DC-DC converters and motor drivers.
Pinout
The NCP51510MNTAG is a high-performance gate driver designed for driving MOSFETs in power conversion applications. It features a 16-pin HTSSOP package.
The primary functions of the pins are as follows:
1. VIN: Supply voltage input.
2. GND: Ground reference.
3. VDD: Power supply for the driver.
4. BOOT: Bootstrap capacitor connection for high-side driver.
5. PHASE: High-side switch output, connected to the source of the high-side MOSFET.
6. HS: High-side driver output.
7. LS: Low-side driver output.
8. RT: Timing resistor connection for controlling dead time and switching frequency.
9. TR/RTN: Ground reference for timing.
10. COMP: Compensation network connection for stability.
11. CS: Current sense input, optional.
12. VREG: Regulated voltage output for internal use.
13. UVLO: Under-voltage lockout threshold settings.
14. SD: Shutdown input for the driver.
15. EN: Enable input.
16. SLOPE: Slope control for gate drive.
Overall, the NCP51510 is designed for efficient control of power conversion circuits.
The primary functions of the pins are as follows:
1. VIN: Supply voltage input.
2. GND: Ground reference.
3. VDD: Power supply for the driver.
4. BOOT: Bootstrap capacitor connection for high-side driver.
5. PHASE: High-side switch output, connected to the source of the high-side MOSFET.
6. HS: High-side driver output.
7. LS: Low-side driver output.
8. RT: Timing resistor connection for controlling dead time and switching frequency.
9. TR/RTN: Ground reference for timing.
10. COMP: Compensation network connection for stability.
11. CS: Current sense input, optional.
12. VREG: Regulated voltage output for internal use.
13. UVLO: Under-voltage lockout threshold settings.
14. SD: Shutdown input for the driver.
15. EN: Enable input.
16. SLOPE: Slope control for gate drive.
Overall, the NCP51510 is designed for efficient control of power conversion circuits.
Manufacturer
The NCP51510MNTAG is manufactured by ON Semiconductor, a global semiconductor company based in Phoenix, Arizona, USA. ON Semiconductor specializes in designing and manufacturing a wide range of semiconductor solutions, including power management, analog, and digital signal processing devices. The company serves various industries such as automotive, industrial, and consumer electronics, focusing on energy-efficient products and technologies. ON Semiconductor is recognized for its commitment to innovation, quality, and sustainability in the semiconductor market.
Application
The NCP51510MNTAG is a high-speed gate driver primarily used in power management applications. Its main areas include:
1. Switching Power Supplies: Enhances efficiency in DC-DC converters and power factor correction circuits.
2. Half-Bridge and Full-Bridge Converters: Facilitates control of MOSFETs or IGBTs in various configurations for efficient energy conversion.
3. Industrial Applications: Supports motor drives and automation systems.
4. Renewable Energy Systems: Utilized in inverters for solar panels and wind turbines.
5. Electric Vehicles: Assists in battery management and power distribution systems.
These applications benefit from its fast switching capabilities and robust performance.
1. Switching Power Supplies: Enhances efficiency in DC-DC converters and power factor correction circuits.
2. Half-Bridge and Full-Bridge Converters: Facilitates control of MOSFETs or IGBTs in various configurations for efficient energy conversion.
3. Industrial Applications: Supports motor drives and automation systems.
4. Renewable Energy Systems: Utilized in inverters for solar panels and wind turbines.
5. Electric Vehicles: Assists in battery management and power distribution systems.
These applications benefit from its fast switching capabilities and robust performance.
Package
The NCP51510MNTAG is packaged in a 10-lead HTSSOP (Thermal Enhanced Thin Shrink Small Outline Package) with a 3mm x 3mm footprint. This package type is designed for efficient thermal management and compact designs in power management applications.
