Imagens apenas para referência
RTL8192ER-CG
+Lista de Materiais-
FabricanteRealtek Semicon
-
Peça do Fabricante #RTL8192ER-CG
-
Em Estoque24398
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Manufacturer | Realtek Semicon |
| Package / Case | QFN-56 |
Visão Geral
Description
- 2.4 GHz operation with support for 150 Mbps PHY rate (MIMO 1x1).
- PCIe interface for easy integration into laptops, routers, and embedded systems.
- Low power consumption, making it suitable for portable devices.
- Advanced security (WPA/WPA2, WEP, AES encryption).
- Linux/Windows driver support for broad compatibility.
Commonly used in Wi-Fi modules, USB dongles, and IoT devices, the RTL8192ER-CG balances performance and cost-effectiveness for basic wireless connectivity.
Equivalent
- RTL8192EU: Similar 802.11n performance, USB interface.
- RTL8192CE: PCIe interface, older but comparable.
- Broadcom BCM4322: Competing 802.11n chip.
- Atheros AR9280: Comparable performance, often used in similar applications.
These chips offer similar 2.4GHz Wi-Fi 4 functionality but may differ in interfaces (USB/PCIe) or driver support.
Features
- Standards: IEEE 802.11b/g/n (2.4GHz only).
- Speed: Up to 300 Mbps (MIMO 2x2, 40MHz bandwidth).
- Interface: PCIe 1.1 for host connectivity.
- Security: WPA/WPA2, WEP, AES/TKIP encryption.
- Advanced Features:
- Supports AP/STA modes.
- Low-power design with PS (Power Saving) modes.
- Integrated LNA/PA for improved signal range.
- Compatibility: Works with Windows/Linux drivers.
Ideal for embedded systems, routers, and PCIe Wi-Fi adapters.
Pinout
- Wireless Connectivity: Supports 802.11b/g/n (2.4GHz) with a max data rate of 150Mbps (1T1R).
- Interfaces:
- SDIO (for host communication)
- USB 2.0 (optional, depending on variant)
- GPIOs (for control/status)
- Power Management: Integrated LDOs for efficient power handling.
- RF Integration: On-chip PA (Power Amplifier) and LNA (Low-Noise Amplifier).
Pins are allocated for power (VDD), ground (GND), RF signals (antenna I/O), and control lines (reset, clock). Exact pinout details should be checked in the datasheet due to variations.