Imagens apenas para referência
S25FL164K0XMFI010
+Lista de MateriaisIC FLASH 64MBIT SPI/QUAD 8SOIC
-
FabricanteCypress Semiconductor Corp
-
Peça do Fabricante #S25FL164K0XMFI010
-
Pacote SOIC-8
-
Em Estoque4789
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Package / Case | Tray |
| Series | FL1-K |
| Part Status | Obsolete |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 64Mb (8M x 8) |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 108 MHz |
| Write Cycle Time - Word Page | 3ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Visão Geral
Description
- Capacity: 16 Mb (2 MB) of non-volatile storage
- Organization: 2,097,152 bytes; 256-byte pages; 4 KB sectors; 64 KB blocks
- Operations: Read, Fast Read, Page Program (256 bytes), Sector/Block Erase, Chip Erase
- Control: Write Enable/Disable, Read/Write Status Registers, block/sector protection, security features
- Power: Low-power modes, including Deep Power-Down
- Throughput: High-speed clock (typical fast read up to tens of MHz, depending on configuration); supports multiple I/O modes on supported variants
Common uses: firmware/boot code storage, data logging, and firmware updates in embedded systems and automotive/industrial equipment. For exact electrical characteristics, timing, and command set, consult the S25FL164K0XMFI010 datasheet.
Equivalent
- Macronix MX25L1645D
- Winbond W25Q16JVSSIG
- GigaDevice GD25Q16C
- ISSI IS25LPX016D
Note: cross-ability depends on packaging and timing (dummy cycles, SQI/QSPI features). Always verify with datasheets and the exact suffix/marking for your board.
Features
- 16-Mbit Serial NOR Flash (2 MB total)
- 2.7–3.6 V supply operation
- 24-bit addressing (no 4-byte mode needed for this size)
- 256-byte page size; erase topologies: 4 KB sectors, 32 KB/64 KB blocks; chip erase
- SPI interface: Standard SPI, Dual I/O, Quad I/O; QPI supported; up to 104 MHz clock
- Read options: fast/dual/quad read and other common read commands
- Deep power-down mode with fast wake-up
- Hardware write-protect (WP) pin and software-controlled protection regions
- Endurance ~100k P/E cycles; data retention ≈ 20 years
- Industrial temperature option: typically -40°C to 85°C (variant-specific)
- Package: 8-pin package (standard SOIC/SOP form factor)
Note: exact temperature grade and timing parameters are device-variant dependent; consult the datasheet for precise specs.
Pinout
- Function: SPI Serial NOR Flash interface
- VCC, VSS (GND)
- CS (Chip Select)
- SCK (Serial Clock)
- SI (Serial Input / MOSI)
- SO (Serial Output / MISO)
- WP# (Write Protect, active low)
- HOLD# (Hold, active low)
Manufacturer
- What kind of company: A semiconductor company specializing in non-volatile memory, specifically NOR serial flash and other flash memory solutions.
Application
- Embedded systems as boot memory and firmware storage for microcontrollers/processors
- Firmware updates and program storage for consumer electronics (set‑top boxes, TVs, cameras), networking gear, printers, automotive ECUs, industrial controllers
- Data logging and configuration storage in IoT devices and industrial equipment
- Execute‑in‑place (XIP) applications where code runs directly from flash with limited RAM
- Any low‑pin, compact, low‑power nonvolatile storage need requiring reliable SPI NOR flash