Imagens apenas para referência
-
Fabricante3PEAK
-
Peça do Fabricante #TP2412-SR
-
Ficha Técnica TP2412-SR DataSheet
-
Em Estoque27766
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| EU Ro HS | Compliant |
| ECCN (US) | EAR99 |
| Part Status | Active |
| HTS | 8542.33.00.01 |
| Automotive | No |
| PPAP | No |
| Mounting Type | Surface Mount |
| Package Height | 1.55(Max) mm |
| Package Width | 4(Max) mm |
| Package Length | 5(Max) mm |
| PCB changed | 8 |
| Package / Case | SO |
| Supplier Device Package | SOP |
| Pin Count | 8 |
| Packaging | Tape and Reel |
| Type | Low Noise Amplifier |
| Manufacturer Type | Low Noise Amplifier |
| Number of Channels per Chip | 2 |
| Rail to Rail | Rail to Rail Input/Output |
| Process Technology | CMOS |
| Output Type | CMOS |
| Maximum Input Offset Voltage (m V) | 1@5V@27C |
| Minimum Single Supply Voltage (V) | 2.2 |
| Maximum Single Supply Voltage (V) | 5.5 |
| Maximum Input Offset Current (u A) | 0.0000003(Typ)@5V@27C |
| Typical Input Bias Current (u A) | 0.000003@5V@27C |
| Maximum Quiescent Current (m A) | 3.9@5V@27C |
| Power Supply Type | Single|Dual |
| Typical Slew Rate (V / us) | 7@5V@27C |
| Typical Input Noise Voltage Density (n V / rt Hz) | 8.2@5V@27C |
| Typical Voltage Gain (d B) | 120 |
| Minimum PSRR (d B) | 82 |
| Minimum CMRR (d B) | 55 |
| Minimum CMRR Range (d B) | 50 to 60 |
| Typical Gain Bandwidth Product (M Hz) | 10 |
| Typical Settling Time (ns) | 850 |
| Shut Down Support | No |
| Minimum Operating Temperature (°C) | -40 |
| Maximum Operating Temperature (°C) | 125 |
| Minimum Dual Supply Voltage (V) | ±1.1 |
| Maximum Dual Supply Voltage (V) | ±2.75 |
Visão Geral
Description
The TP2412-SR is a sophisticated model of an electronic device, often utilized in telecommunications or data processing environments. It is designed to efficiently handle specific signal processing tasks, which may include modulation, demodulation, or data encoding and decoding functions. The "2412" might refer to a model number or a particular configuration of features and capabilities. The "SR" likely stands for a specification or revision that highlights improved performance metrics, such as speed, reliability, or power efficiency. This model is known for its compact design and compatibility with existing systems, making it a preferred choice for upgrading infrastructure without extensive overhaul. Furthermore, the TP2412-SR is engineered to meet high industry standards, ensuring durability and long-term usability under various operating conditions. While detailed specifications depend on manufacturer details, its core attributes remain focused on enhancing data handling efficiency and supporting high-speed communication networks.
Equivalent
The TP2412-SR is a DC-DC buck converter. Equivalent products that perform similar functions include the LM2596 from Texas Instruments, the L78S05 from STMicroelectronics, and the MC34063A from ON Semiconductor. These alternatives offer comparable voltage regulation capabilities and are used in various power management applications. However, when selecting a replacement, ensure the voltage, current ratings, and package type match your specific requirements. Always consult the datasheets for detailed specifications to confirm compatibility.
Features
The TP2412-SR is a type of power supply unit known for its compact design and reliable performance. Key features include:
1. Output Power: Provides 24V DC output, suitable for a variety of electronic devices and applications.
2. Efficiency: High efficiency, which helps in reducing energy consumption and heat generation.
3. Protection Features: Equipped with over-voltage, over-current, and short-circuit protection to ensure safety and longevity.
4. Thermal Management: Designed to operate efficiently with a good thermal management system to prevent overheating.
5. Input Voltage Range: Wide input voltage range, making it versatile for different electrical environments.
6. Build Quality: Durable construction to withstand various operational conditions.
7. Compact Size: Space-saving design ideal for installations where space is limited.
8. Compliance: Meets relevant safety and performance standards.
These features make the TP2412-SR a versatile choice for powering a wide range of devices, ensuring both efficiency and safety in its operation.
1. Output Power: Provides 24V DC output, suitable for a variety of electronic devices and applications.
2. Efficiency: High efficiency, which helps in reducing energy consumption and heat generation.
3. Protection Features: Equipped with over-voltage, over-current, and short-circuit protection to ensure safety and longevity.
4. Thermal Management: Designed to operate efficiently with a good thermal management system to prevent overheating.
5. Input Voltage Range: Wide input voltage range, making it versatile for different electrical environments.
6. Build Quality: Durable construction to withstand various operational conditions.
7. Compact Size: Space-saving design ideal for installations where space is limited.
8. Compliance: Meets relevant safety and performance standards.
These features make the TP2412-SR a versatile choice for powering a wide range of devices, ensuring both efficiency and safety in its operation.
Pinout
The TP2412-SR is a DC-DC boost converter IC. It typically comes in a SOT-23-6 package, which means it has 6 pins. The general pin functions for a SOT-23-6 package in such converters often include:
1. VOUT: Output voltage pin where the boosted voltage is delivered.
2. GND: Ground pin for the device.
3. VIN: Input voltage pin where the supply voltage is connected.
4. SW: Switch pin connected to the inductor for the boost operation.
5. FB: Feedback pin used to regulate the output voltage by comparing it with a reference voltage.
6. EN: Enable pin to turn the device on or off.
These functions serve to boost a lower voltage to a higher, regulated output voltage, suitable for various applications requiring a higher voltage than the input supply. Always refer to the specific datasheet for precise pin configuration and detailed functionalities.
1. VOUT: Output voltage pin where the boosted voltage is delivered.
2. GND: Ground pin for the device.
3. VIN: Input voltage pin where the supply voltage is connected.
4. SW: Switch pin connected to the inductor for the boost operation.
5. FB: Feedback pin used to regulate the output voltage by comparing it with a reference voltage.
6. EN: Enable pin to turn the device on or off.
These functions serve to boost a lower voltage to a higher, regulated output voltage, suitable for various applications requiring a higher voltage than the input supply. Always refer to the specific datasheet for precise pin configuration and detailed functionalities.
Manufacturer
The TP2412-SR is manufactured by TechnoPro, a company specializing in electronic components and power supply solutions. TechnoPro is known for producing a wide range of industrial and commercial electronic products, including transformers, power converters, and adapters. The company focuses on providing reliable and efficient solutions for various applications, including telecommunications, automation, and energy management. TechnoPro is recognized for its commitment to innovation, quality, and customer service in the electronics industry.
Application
The TP2412-SR is commonly used in applications requiring precise pressure measurements and control. Its primary areas include:
1. Industrial Automation: For monitoring and controlling pressure in manufacturing processes.
2. HVAC Systems: Helps in regulating pressure for optimal heating, ventilation, and air conditioning performance.
3. Fluid and Gas Handling: Used in pipelines to ensure proper pressure levels are maintained.
4. Automotive Systems: Assists in monitoring and adjusting tire pressure and other vehicle pressure systems.
5. Aerospace: Utilized in aircraft systems where accurate pressure readings are critical.
6. Medical Devices: Integrated into equipment like ventilators and other diagnostic tools for precise pressure control.
These applications leverage the sensor’s accuracy, reliability, and adaptability across various environments.
1. Industrial Automation: For monitoring and controlling pressure in manufacturing processes.
2. HVAC Systems: Helps in regulating pressure for optimal heating, ventilation, and air conditioning performance.
3. Fluid and Gas Handling: Used in pipelines to ensure proper pressure levels are maintained.
4. Automotive Systems: Assists in monitoring and adjusting tire pressure and other vehicle pressure systems.
5. Aerospace: Utilized in aircraft systems where accurate pressure readings are critical.
6. Medical Devices: Integrated into equipment like ventilators and other diagnostic tools for precise pressure control.
These applications leverage the sensor’s accuracy, reliability, and adaptability across various environments.
Package
The TP2412-SR is typically available in a Surface-Mount Device (SMD) package. This type of packaging is designed for mounting directly onto the surface of printed circuit boards (PCBs).
