TPS2064CDGNR

TPS2064CDGNR is Texas Instruments’ single-channel high-side load switch with built‑in protection. It sits between a system supply (Vin) and a downstream load, enabling or gating power under digital control. Key ideas:
- Integrated MOSFET with low on-resistance, suitable for dropping in to power rails with minimal voltage drop.
- Protection features: overcurrent/short-circuit protection, undervoltage lockout (UVLO), thermal shutdown, and reverse-current protection.
- Control: EN input to turn the switch on/off; designed for simple power‑up sequencing and controlled turn‑on (soft-start behavior helps limit inrush).
- Operating range: intended for typical 1.8–5.5 V systems often used in battery-powered devices (check datasheet for exact limits).
- Package: CDGNR denotes TI’s specific package and reel/packaging variant.
Common uses: gate regulators, sensors, microcontrollers, or other loads that benefit from a protected, controlled power switch.
Note: For exact electrical specs, pinout, and timing details, refer to the TPS2064 datasheet and the CDGNR packaging notes.

Do you want cross-references to other vendors or TI family equivalents only? Also, please share required specs (input voltage, current limit, on/off control type, package) so I can give accurate equivalents.

Concise features of TPS2064CDGNR:
- High-side load switch with integrated MOSFET
- Current-limit protection (short-circuit protection)
- Inrush/inrush-control via soft-start
- Thermal shutdown protection
- Undervoltage lockout (UVLO)
- Enable input to turn the switch on/off
- Reverse-current protection
- Low quiescent current
- Suitable for hot-swap/applications with a wide input range and compact packaging (8-pin device)

Pin count: 8 (MSOP/VSSOP-style, DGN package).
Function: A single-channel high-side power distribution switch with current limit, overcurrent protection, and fault/diagnostic indication. It provides IN to OUT switching for a load, with an EN pin to enable/disable, and pins for current‑limit setting and fault reporting (plus GND).

- Manufacturer: Texas Instruments (TI).
- Company type: A global American semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits, including power-management and protection devices. Headquartered in Dallas, Texas.

TPS2064CDGNR is a high-side load switch with current limit, protection features, and enable control. Common applications include:
- Power-gating and sequencing of rails in portable/battery-powered devices (MCUs, sensors, memory).
- Driving loads such as LEDs and peripheral circuits.
- Inrush current limiting to decouple capacitors and control turn-on.
- Short-circuit protection and reverse-current protection to safeguard devices.
- Automotive/industrial systems requiring safe power-up/down and protection.

TPS2064CDGNR is in an 8-pin VSSOP package (VSSOP-8), RoHS-compliant, with Tape & Reel (NR).