Imagens apenas para referência
IC REG BUCK ADJUSTABLE 6A 14VQFN
-
FabricanteTexas Instruments
-
Peça do Fabricante #TPS54620RGYR
-
Pacote VQFN-14
-
Em Estoque5422
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Package / Case | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Series | SWIFT™ |
| Part Status | Active |
| Function | Step-Down |
| Output Configuration | Positive |
| Topology | Buck |
| Output Type | Adjustable |
| Number of Outputs | 1 |
| Voltage - Input (Min) | 4.5V |
| Voltage - Input (Max) | 17V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Voltage - Output (Max) | 15V |
| Current - Output | 6A |
| Frequency - Switching | 200kHz ~ 1.6MHz |
| Synchronous Rectifier | Yes |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
Visão Geral
Description
This chip includes advanced features such as internal loop compensation, a high-side MOSFET and low-side MOSFET for synchronous rectification, and cycle-by-cycle current limiting for protection. It also supports various operating modes, including forced continuous conduction mode (CCM) and discontinuous conduction mode (DCM), to optimize efficiency across different load conditions. The device is available in a thermally enhanced 3.5mm x 3.5mm QFN package, which helps in efficient heat dissipation, making it ideal for compact and thermally constrained applications.
Equivalent
1. LM43603 from Texas Instruments
2. LMR33630 from Texas Instruments
3. MAX17504 from Maxim Integrated
4. LT8640S from Analog Devices
5. MP28275 from Monolithic Power Systems
These alternatives offer similar voltage and current ratings, and feature sets for comparable applications. Always verify compatibility with your specific design requirements.
Features
1. Wide Input Voltage Range: Operates from 4.5V to 17V, suitable for various applications.
2. High Output Current: Capable of delivering up to 6A continuous output current.
3. Adjustable Output Voltage: Allows for outputs ranging from 0.76V to 6V.
4. High Efficiency: Achieves efficiency rates up to 95%, minimizing power loss.
5. Switching Frequency: Supports a fixed frequency of 500kHz, optimizing performance and size.
6. Integrated MOSFETs: Incorporates high-side and low-side MOSFETs for better efficiency and space saving.
7. Soft Start: Features a programmable soft start to limit inrush current during startup.
8. Protection Features: Includes overcurrent protection, thermal shutdown, and undervoltage lockout.
9. Compact Package: Available in a 16-pin VQFN package, facilitating compact designs.
10. Thermal Performance: Designed for good thermal performance, suitable for demanding environments.
These features make the TPS54620RGYR ideal for applications in telecom, networking, and industrial systems requiring robust power management.
Pinout
1. VIN (Pin 1): Input voltage supply.
2. EN (Pin 2): Enable pin to turn the converter on/off.
3. SS/TR (Pin 3): Soft-start and tracking pin.
4. FB (Pin 4): Feedback pin to set the output voltage.
5. COMP (Pin 5): Compensation for error amplifier.
6. RT/CLK (Pin 6): Frequency set and synchronization.
7. PWRGD (Pin 7): Power good indicator.
8. BOOT (Pin 8): Bootstrap capacitor connection.
9. SW (Pins 9-10): Switch node, connected to the inductor.
10. GND (Pin 11): Ground connection.
11. PH (Pins 12-14): Phase node, connect to the inductor.
12. VREG5 (Pin 15): 5V regulator output.
13. VBST (Pin 16): Bootstrap capacitor.
Additionally, the thermal pad (exposed) is used for heat dissipation and should be electrically connected to ground.
This layout supports efficient power conversion with a focus on compactness and thermal management, suitable for various electronic applications.
Manufacturer
The company is renowned for its high-performance analog semiconductors and embedded processors. These products are integral in numerous applications, such as power management, data converters, amplifiers, sensors, and microcontrollers. Texas Instruments has a strong focus on innovation and continuously invests in research and development to provide advanced technologies and solutions.
As a leader in the semiconductor industry, TI operates worldwide, with manufacturing, design, and sales operations across the globe. Its products are widely used by engineers and designers to create energy-efficient electronic systems, making TI a crucial player in advancing technological development.