Imagens apenas para referência
W25Q128JVBIQ
+Lista de MateriaisIC FLASH 128MBIT SPI 24TFBGA
-
FabricanteWinbond Electronics
-
Peça do Fabricante #W25Q128JVBIQ
-
Em Estoque2216
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Series | SpiFlash® |
| PartStatus | Active |
| BaseProductNumber | W25Q128 |
| DigiKeyProgrammable | Not Verified |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 128Mbit |
| MemoryOrganization | 16M x 8 |
| MemoryInterface | SPI - Quad I/O, QPI |
| ClockFrequency | 133 MHz |
| WriteCycleTime-Word,Page | 3ms |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package | 24-TBGA |
| SupplierDevicePackage | 24-TFBGA (6x8) |
| Packaging | Tray |
Visão Geral
Description
Equivalent
- Macronix MX25L128 family (e.g., MX25L12835F)
- Micron N25Q128/N25Q128A series
- Gigadevice GD25Q128 (e.g., GD25Q128CSIG)
- Spansion/Cypress S25FL128S (S25FL128SAG)
- ISSI IS25LP128D
- Atmel/Adesto AT25DF128 (AT25DF128D/A)
Notes: all are 3.3V SPI NOR; check exact timing, package, and QIO/dual/quad options.
Features
- 128 Mb (16 MB) serial flash memory
- SPI interface with standard and Quad I/O (QSPI) support
- Operating voltage: 2.7–3.6 V
- Fast read up to 104 MHz
- 3-byte addressing (fits 16 MB); supports page programming up to 256 bytes
- Erase: 4 KB sectors; 64 KB blocks; optional bulk erase
- Endurance: ~100,000 program/erase cycles; data retention ~20 years
- Deep power-down mode for low power consumption
- Write protection and block-protect features; status register with WEL
- Security features typical of Winbond SPI flash (protects regions, safe reset)
- Package: commonly 8-pin SOP/8-pin package variants
Note: exact temperature range and supported read modes (e.g., Dual/Quad) may vary by specific lot/temperature grade.
Pinout
- Function: Serial (SPI) non-volatile flash memory. 128 Mb capacity, uses CS, CLK, DI (MOSI), DO (MISO), plus WP, HOLD, Vcc, GND. Supports standard/dual/quad SPI, with page program, sector/block erase, read/write protections, and deep power-down for firmware/data storage.
Manufacturer
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory integrated circuits (NOR Flash, DRAM, etc.) and is a public global supplier in the memory IC market.
Application
- Firmware storage and boot memory for microcontrollers and embedded SoCs
- Code and data storage in consumer electronics (set-top boxes, printers, cameras, TVs, wearables)
- IoT/edge devices and networking equipment (firmware images, logs, local caches)
- Industrial and automotive electronics (control units, instrument clusters, gateways)
- Data logging and local archival storage in space-constrained devices
Package
Frequently Asked Questions
Q: What is the memory density and interface of the W25Q128JVBIQ?
A: This device has 128Mbit (16M x 8) NOR Flash memory and supports SPI with Quad I/O and QPI interfaces.
Q: What is the maximum clock frequency for read operations?
A: The clock frequency is up to 133 MHz, enabling high-speed data transfer in Quad I/O mode.
Q: What is the voltage supply range for this component?
A: It operates from 2.7V to 3.6V, making it suitable for standard 3.3V logic systems.
Q: What is the typical page program time?
A: The write cycle time for a word or page is 3 ms, ensuring efficient programming for data storage.
Q: What is the operating temperature range?
A: It is rated for industrial use from -40°C to +85°C (TA), ensuring reliability in harsh environments.
Q: What package options are available for this part?
A: It comes in a 24-TBGA surface-mount package, with a supplier device package of 24-TFBGA (6x8 mm).
Q: Is this part suitable for code shadowing or data storage applications?
A: Yes, as a SPI NOR Flash from the SpiFlash® series, it is ideal for firmware storage, boot code, and data logging.
