Imagens apenas para referência
W25Q32JVSSAQ
+Lista de MateriaisIC FLASH 32MBIT SPI/QUAD 8SOIC
-
FabricanteWinbond Electronics
-
Peça do Fabricante #W25Q32JVSSAQ
-
Em Estoque7644
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Series | SpiFlash® |
| Part Status | Active |
| Base Product Number | W25Q32 |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 32Mbit |
| Memory Organization | 4M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Write Cycle Time - Word, Page | 3ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOIC |
| Packaging | Tube |
| Access Time | 6 ns |
Visão Geral
Description
Key points:
- Capacity and organization: 32 Mbit (4 MByte), typically organized as 4M × 8.
- Interface: SPI serial interface (CS, CLK, MOSI, MISO) with optional fast modes; some variants support dual/quad I/O modes.
- Operations: 256‑byte page programming; erase granularity includes 4 KB sectors, 64 KB blocks, and full‑chip bulk erase; fast read up to tens of MHz (commonly up to ~104 MHz).
- Features: read/write protection options, status register, power‑down and wake, and low‑power modes.
- Electricals and packaging: usually 2.7–3.6 V supply; 8‑pin package (SOP/SOIC); suffixes indicate packaging/temperature options.
- Applications: firmware storage, boot memory, data logging, and other non‑volatile storage needs in MCU systems.
Note: exact voltage ranges, temperature grade, and supported modes depend on the specific suffix variant; consult the datasheet for precise specs.
Equivalent
- Macronix MX25L3206E
- Gigadevice GD25Q32F
- Puya P25Q32L
- Spansion/Cypress S25FL032P
- Micron N25Q032
- SST SST25VF032B
Note: Verify voltage (usually 3.3V) and package (8‑SOIC) to ensure true interchangeability; check timing/quad I/O features in datasheets.
Features
- 32‑Mbit (4‑Mbyte) serial flash memory
- 2.7–3.6 V operation
- SPI interface up to 104 MHz (standard SPI)
- Memory organization: 256‑byte page; 4 KB sectors; 32 KB/64 KB blocks; chip erase
- Endurance: ~100,000 program/erase cycles; data retention ~20 years
- Power modes: normal read; Deep Power‑Down and standby
- Security/protection: software and hardware write protection; block protection and WP# pin
- Packaging: 8‑pin SOP (W25Q32JVS‑ family packaging)
- Temperature: −40 °C to 85 °C (industrial variants available)
Pinout
- Function: 32 Mbit serial flash memory with SPI interface (Winbond W25Q32JV series) for non-volatile storage; supports standard SPI read/write/erase commands (operates around 2.7–3.6 V).
Manufacturer
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory ICs (NOR flash, DRAM, and related products); an integrated device manufacturer (IDM) with global operations.
Application
- Boot memory and firmware/code storage for microcontrollers/SoCs
- Execute-in-place (XiP) firmware storage
- Firmware updates and configuration data for IoT, wearables, and consumer electronics
- Data logging and event storage in industrial equipment
- Storage for networking gear (routers, modems, switches)
- Automotive/in-vehicle electronics and multimedia modules
- Portable devices, printers, and other peripherals
Package
Frequently Asked Questions
Q: What is the maximum clock frequency for SPI operations on this W25Q32JVSSAQ?
A: The device supports a maximum clock frequency of 133 MHz for SPI operations, enabling high-speed data reads and writes.
Q: Does this memory support Quad I/O SPI for faster data throughput?
A: Yes, it features a SPI - Quad I/O interface, allowing four data lines for enhanced transfer rates beyond standard SPI.
Q: What is the typical write cycle time per page for this flash memory?
A: The typical write cycle time is 3ms per word or page, ensuring efficient programming for NOR FLASH applications.
Q: Can this device operate in extended temperature ranges for industrial use?
A: Yes, it has an operating temperature range of -40°C to 105°C, suitable for harsh industrial environments.
Q: What is the memory density and organization of the W25Q32JVSSAQ?
A: It offers 32Mbit (4M x 8) of non-volatile FLASH memory, organized as 4M bytes with an 8-bit wide interface.
Q: Does the component come pre-programmed or require initial blank programming?
A: The device is supplied blank (erased) and requires programming via the SPI interface before first use in the application.
Q: What supply voltage range is required for proper operation?
A: The operating voltage range is 2.7V to 3.6V, making it compatible with standard 3.3V logic systems.
