AD534JD
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4704 PCS
- Package
- CDIP-14
- Series
- Linear - Multiplicadores analógicos, Divideres
Esta comparação detalhada entre AD534JD e AD534KD fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD534KD is a higher-grade functional replacement candidate for the AD534JD, sharing identical analog multiplier/divider functionality, pin configuration, and package type. The KD grade offers improved nonlinearity and total error specifications, making it suitable for applications requiring tighter accuracy. Both devices are direct substitutes in the same socket, with the KD providing superior performance at a correspondingly higher cost tier.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD534JD | AD534KD | Why it matters |
|---|---|---|---|
| Grade / Temperature Range | Commercial (0°C to +70°C) | Commercial (0°C to +70°C) | Both are commercial-grade parts; the J and K suffixes denote different accuracy grades rather than different temperature ranges. |
| Total Error (Nonlinearity + Gain + Offset) | ±1.0% max | ±0.25% max | The K grade offers roughly four times better guaranteed accuracy, which directly affects overall system precision in analog computation. |
| Nonlinearity | ±0.5% max | ±0.1% max | Lower nonlinearity in the K grade yields more faithful multiplication, division, and squaring over the full input range. |
| Output Offset Voltage | ±5 mV max | ±2 mV max | Smaller output offset reduces DC error at the summing node, improving accuracy in precision analog computation. |
| Input Offset Voltage (X, Y, Z) | ±5 mV max | ±2 mV max | Tighter input offsets in the K grade minimize error contributions from each multiplier input channel. |
| Gain Error | ±0.5% max | ±0.1% max | Lower gain error ensures the transfer function scale factor is closer to ideal, critical for calibrated multiplication. |
| Supply Voltage Range | ±8 V to ±18 V | ±8 V to ±18 V | Identical supply range means both parts are interchangeable from a power-supply design standpoint. |
| Package | 14-Lead Ceramic DIP (Side-Brazed) | 14-Lead Ceramic DIP (Side-Brazed) | Same package and pinout allow direct drop-in replacement without PCB or socket changes. |
| Function | Analog Multiplier / Divider | Analog Multiplier / Divider | Both implement the same multiplier/divider/squarer function, so the core application behavior is identical. |
| Price / Cost Tier | Lower cost grade | Higher cost grade | The K grade commands a premium for its tighter specifications; selection depends on required accuracy versus budget. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD534JD | AD534KD |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Function | Analog Multiplier/Divider | Analog Multiplier/Divider |
| Number of Bits / Stages | 4-Quadrant | 4-Quadrant |
The AD534JD and AD534KD are both analog multipliers from Analog Devices, but they differ in their specified nonlinearity and total error grades. The AD534KD offers a tighter maximum nonlinearity specification of ±0.25% of full scale, while the AD534JD is specified at ±0.5% of full scale. This makes the KD version more suitable for higher-accuracy applications.
Yes. Both the AD534JD and AD534KD are housed in the same 14-pin hermetic side-brazed ceramic dual in-line package (DIP) and share an identical pinout. This allows them to be used interchangeably on the same PCB footprint without layout changes.
Both the AD534JD and AD534KD are specified for operation over the commercial temperature range of 0°C to +70°C. They are not rated for industrial or military temperature ranges; those grades are denoted by different suffix letters (e.g., AD534LD for 0°C to +70°C with different specs, or AD534SD for -55°C to +125°C).
In most cases, yes, because the AD534KD is a higher-grade version of the same die with tighter specifications. However, the designer must verify that the improved nonlinearity and total error do not adversely affect loop stability, calibration constants, or other circuit parameters that may have been optimized for the JD grade. Always consult the official Analog Devices datasheet for both grades before substitution.
Per the Analog Devices AD534 datasheet, the AD534JD has a maximum total error of ±1.0% of full scale at 25°C, while the AD534KD has a maximum total error of ±0.5% of full scale at 25°C. Total error includes contributions from nonlinearity, scale factor, and offset errors.
Yes. Both grades provide access to offset and scale factor trim pins, and the datasheet recommends external trimming to achieve the specified accuracy. Without trimming, the initial total error may be higher than the maximum specified values. The AD534KD, with its tighter grade, may require less trim range or allow for a simpler trim procedure in precision applications.
Both the AD534JD and AD534KD operate from standard dual supplies of ±15 V. The datasheet specifies a supply range of ±8 V to ±18 V, but all published specifications are guaranteed at ±15 V. They typically draw about 6 mA of quiescent supply current.
As of the latest available information from Analog Devices, the AD534 series is listed as obsolete or not recommended for new designs. Customers should verify current lifecycle status with Analog Devices or authorized distributors such as DigiKey or Mouser, and consider replacement parts or redesigns for new projects.