AD534JD
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4704 PCS
- Package
- CDIP-14
- Series
- Linear - Multiplicadores analógicos, Divideres
Esta comparação detalhada entre AD534JD e AD534KDZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD534KDZ is a functionally compatible replacement candidate for the AD534JD, sharing the same analog multiplier/divider architecture, TO-100 package, and operating temperature range. The primary distinction is the specified nonlinearity grade, which may affect precision-critical applications and should be validated against system accuracy requirements.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD534JD | AD534KDZ | Why it matters |
|---|---|---|---|
| Grade / Accuracy Class | J grade | K grade | The K grade offers tighter guaranteed accuracy than the J grade, directly affecting total error budget in precision analog computation. |
| Total Error (max, 25°C) | ±1.0% | ±0.25% | Lower total error improves multiplication, division, and squaring accuracy in instrumentation and control loops. |
| Operating Temperature Range | 0°C to +70°C | 0°C to +70°C | Commercial temperature range defines the environment where guaranteed specifications apply. |
| Package / Mounting | 14-Lead Ceramic DIP (Side Brazed) | 14-Lead Ceramic DIP (Side Brazed) | Package and pinout determine board footprint and whether the parts are drop-in compatible. |
| Supply Voltage (Dual) | ±8 V to ±18 V | ±8 V to ±18 V | Wide dual-supply range allows use in both ±15 V and ±12 V analog systems. |
| Input Offset Voltage (max) | ±1.0 mV | ±0.25 mV | Lower offset reduces DC error in precision multiply/divide and function generation circuits. |
| Nonlinearity (max) | ±0.5% | ±0.1% | Better nonlinearity means more accurate analog computation over the full input range. |
| Bandwidth (Small Signal) | 1 MHz | 1 MHz | Bandwidth sets the maximum signal frequency for accurate multiplication and division. |
| RoHS Compliance | Non-RoHS | RoHS Compliant | RoHS status affects regulatory compliance and suitability for new product designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD534JD | AD534KDZ |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Analog Devices Inc. |
| Part Status | Obsolete | Active |
| Function | Analog Multiplier/Divider | Analog Multiplier/Divider |
| Number of Bits / Stages | 4-Quadrant | 4-Quadrant |
The AD534JD and AD534KDZ are both analog multipliers from Analog Devices, but they differ in grade and package. The AD534JD is a J-grade device in a hermetic TO-116 (DIP) package, while the AD534KDZ is a K-grade device in a lead-free, RoHS-compliant TO-116 (DIP) package. The K-grade offers tighter guaranteed nonlinearity and total error specifications than the J-grade.
Yes. Both devices use the same TO-116 (DIP) pinout, so they are pin-compatible when the package and temperature grade requirements of the target design are satisfied.
The AD534KDZ (K-grade) has tighter guaranteed specifications than the AD534JD (J-grade). For example, the K-grade offers lower maximum total error and better nonlinearity over the specified temperature range. The exact limits should be confirmed from the Analog Devices AD534 datasheet.
Both the AD534JD and AD534KDZ are specified for the commercial temperature range of 0°C to +70°C. The difference between the J and K grades is in guaranteed accuracy, not in the rated temperature range.
The AD534KDZ is the lead-free, RoHS-compliant version of the AD534 in the same package style. The AD534JD is the older non-RoHS version. For new designs requiring RoHS compliance, the AD534KDZ is the appropriate choice, provided the tighter K-grade specifications are acceptable.
In most cases yes, because both are AD534 multipliers in the same TO-116 package with the same pinout and function. However, the designer should verify that the K-grade specifications, RoHS construction, and any differences in external trim requirements are compatible with the existing circuit and procurement requirements.
Both are precision analog multipliers/dividers that can perform multiplication, division, squaring, square rooting, and other nonlinear analog functions. They are used in instrumentation, signal processing, and control systems where accurate analog computation is required.
Availability can change over time. The AD534KDZ is commonly listed as an active RoHS-compliant part by distributors, while the AD534JD may be obsolete or non-RoHS. Designers should confirm current lifecycle status and availability with Analog Devices or authorized distributors such as DigiKey, Mouser, or TTI before specifying either part.