AD8422ARZ vs AD8421BRZ-RL

Esta comparação detalhada entre AD8422ARZ e AD8421BRZ-RL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8422ARZ and AD8421BRZ-RL are both precision instrumentation amplifiers in the same SOIC-8 package with pin-compatible footprints, making the AD8422ARZ a viable functional replacement candidate for the AD8421BRZ-RL in many designs. However, the two devices differ in gain-bandwidth, noise, and supply range characteristics, so validation against the target application's bandwidth, noise, and supply requirements is recommended before substitution.

Package Type High match
Pin Configuration High match
Gain Bandwidth Product Validation required
Input Voltage Noise Validation required

Parts at a glance

Part A

AD8422ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
3872 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Part B

AD8421BRZ-RL

Analog Devices Inc.

Lifecycle
Active
Stock
9374 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8422ARZ AD8421BRZ-RL Why it matters
Number of Channels 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent.
Gain Bandwidth Product (GBP) 2.2 MHz 10 MHz Higher GBP allows the AD8421 to maintain accurate gain at higher signal frequencies, affecting bandwidth-critical designs.
Input Voltage Noise (1 kHz) 8 nV/√Hz 3 nV/√Hz Lower input noise improves signal-to-noise ratio for low-level sensor signals; the AD8421 is notably quieter.
Input Offset Voltage (max) 70 µV 60 µV Offset voltage directly adds DC error to the amplified signal; lower offset improves precision in DC-coupled measurements.
Supply Voltage Range ±2.3 V to ±18 V (4.6 V to 36 V) ±2.5 V to ±18 V (5 V to 36 V) Slightly wider low-end supply range on the AD8422 allows operation at lower single-supply voltages.
Quiescent Supply Current 300 µA 2.3 mA Lower quiescent current makes the AD8422 preferable for battery-powered or low-power applications.
CMRR (G=1000, DC to 60 Hz) 120 dB 134 dB Higher common-mode rejection suppresses interference; the AD8421 offers superior rejection in high-gain precision measurements.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both suit the same industrial environments.
Package 8-Lead SOIC 8-Lead SOIC Same package footprint enables drop-in board-level substitution without layout changes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8422ARZ AD8421BRZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Slew Rate 0.8V/µs 35V/µs
-3 dB Bandwidth 2.2 MHz 10 MHz
Current - Input Bias 500 pA 100 pA
Voltage - Input Offset 60 µV 25 µV
Supply Current 300µA 2mA
Current - Output / Channel 20 mA 65 mA
Voltage - Supply Span(Min) 4.6 V 5 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Output Type Rail-to-Rail -

Frequently asked questions

What are the key differences between the AD8422ARZ and AD8421BRZ-RL?

The AD8422ARZ is an instrumentation amplifier in an 8-lead SOIC package with a gain range of 1 to 1000, a supply range of ±2.3 V to ±18 V, and a typical input offset voltage of 70 µV. The AD8421BRZ-RL is a lower-noise instrumentation amplifier in an 8-lead SOIC package with a gain range of 1 to 10000, a supply range of ±2.25 V to ±18 V, and a typical input voltage noise of 3 nV/√Hz. The AD8421BRZ-RL offers lower noise and wider gain range, while the AD8422ARZ offers lower power consumption.

Can the AD8422ARZ and AD8421BRZ-RL be used interchangeably in the same circuit?

No, they are not pin-for-pin or specification-for-specification drop-in replacements. Although both are 8-lead SOIC instrumentation amplifiers, they differ in gain-setting resistor values, noise performance, bandwidth, and supply current. The gain equation and external resistor selection must be recalculated, and the circuit must be revalidated for noise, bandwidth, and stability before substitution.

How do the noise specifications of the AD8422ARZ and AD8421BRZ-RL compare?

The AD8421BRZ-RL has a typical input voltage noise of 3 nV/√Hz at 1 kHz, making it suitable for low-level signal amplification. The AD8422ARZ has a higher typical input voltage noise of 8 nV/√Hz at 1 kHz. For applications requiring the lowest possible noise floor, the AD8421BRZ-RL is the preferred choice.

What are the gain ranges and gain-setting methods for these two amplifiers?

Both devices set gain using a single external resistor. The AD8422ARZ supports gains from 1 to 1000, while the AD8421BRZ-RL supports gains from 1 to 10000. The gain resistor formula differs between the two parts, so the external resistor value must be selected according to each device's respective datasheet equation.

How do the supply voltage and power consumption of the AD8422ARZ and AD8421BRZ-RL differ?

The AD8422ARZ operates from ±2.3 V to ±18 V and typically draws 300 µA of supply current. The AD8421BRZ-RL operates from ±2.25 V to ±18 V and typically draws 2.3 mA of supply current. The AD8422ARZ is therefore better suited to low-power, battery-operated designs, while the AD8421BRZ-RL trades higher power for lower noise and wider gain range.

What bandwidth can be expected from each device at a gain of 100?

At a gain of 100, the AD8422ARZ provides a typical -3 dB bandwidth of approximately 200 kHz, while the AD8421BRZ-RL provides a typical -3 dB bandwidth of approximately 200 kHz as well. Bandwidth should always be confirmed against the specific gain and supply conditions in the manufacturer datasheet.

Are both parts available in the same package and pinout?

Yes, both the AD8422ARZ and AD8421BRZ-RL are offered in an 8-lead SOIC package with the same pin functions: gain resistor pins, inverting and non-inverting inputs, reference, output, and supply pins. However, identical pinout does not guarantee identical electrical performance, so circuit-level validation is still required.

Which device is better suited for precision low-level sensor amplification?

The AD8421BRZ-RL is generally better suited for precision low-level sensor amplification because of its lower input voltage noise of 3 nV/√Hz and wider gain range up to 10000. The AD8422ARZ remains a viable option where lower supply current is more critical than the lowest achievable noise floor.