AD8422ARZ vs AD8428ARZ-RL

Esta comparação detalhada entre AD8422ARZ e AD8428ARZ-RL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8422ARZ and AD8428ARZ-RL are both precision instrumentation amplifiers in the same SOIC-8 package, but they are not direct drop-in substitutes: the AD8428ARZ-RL offers substantially higher gain-bandwidth and fixed high gain, while the AD8422ARZ provides wider supply range and lower power. Designers should validate gain configuration, bandwidth, and supply requirements before substituting one for the other.

Package Type High match
Supply Voltage Range Validation required
Gain Configuration Not compatible
Bandwidth Not compatible

Parts at a glance

Part A

AD8422ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
3872 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Part B

AD8428ARZ-RL

Analog Devices Inc.

Lifecycle
Active
Stock
4871 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8422ARZ AD8428ARZ-RL Why it matters
Number of Amplifiers 1 1 Both are single instrumentation amplifiers, so channel count is equivalent for substitution.
Gain Range 1 to 1000 (set by external resistor) Fixed gain of 2000 The AD8422 offers user-programmable gain via an external resistor, while the AD8428 has a fixed gain of 2000, making them non-interchangeable for applications requiring variable gain.
Input Offset Voltage (max) 70 µV 30 µV Lower offset voltage improves DC accuracy; the AD8428 provides tighter offset performance.
Input Voltage Noise (1 kHz) 8 nV/√Hz 1.5 nV/√Hz The AD8428 has significantly lower voltage noise, which is critical for low-level signal amplification.
Bandwidth (-3 dB) 2.2 MHz (G = 1) 3.5 MHz (G = 2000) Bandwidth depends on gain configuration; the AD8428 maintains wide bandwidth even at high fixed gain.
Supply Voltage Range ±2.3 V to ±18 V (4.6 V to 36 V) ±4 V to ±18 V (8 V to 36 V) The AD8422 supports lower supply voltages, enabling use in lower-power or single-supply systems where the AD8428 cannot operate.
Supply Current (per amplifier) 300 µA 6.8 mA The AD8422 draws far less supply current, making it preferable for power-sensitive designs.
CMRR (G = 1000) 114 dB 130 dB Higher common-mode rejection improves performance in noisy environments; the AD8428 offers superior CMRR.
Package 8-Lead SOIC 8-Lead SOIC Both use the same 8-lead SOIC footprint, allowing drop-in PCB compatibility.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both suit the same industrial environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8422ARZ AD8428ARZ-RL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Slew Rate 0.8V/µs 50V/µs
-3 dB Bandwidth 2.2 MHz 3.5 MHz
Current - Input Bias 500 pA 200 nA
Voltage - Input Offset 60 µV 100 µV
Supply Current 300µA 6.5mA
Current - Output / Channel 20 mA 30 mA
Voltage - Supply Span(Min) 4.6 V 8 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Output Type Rail-to-Rail -

Frequently asked questions

What are the primary differences between the AD8422ARZ and AD8428ARZ-RL?

The AD8422ARZ is a single-channel, low-power instrumentation amplifier in an 8-lead SOIC package, while the AD8428ARZ-RL is a single-channel, low-noise instrumentation amplifier in an 8-lead SOIC package supplied in tape-and-reel packaging. The AD8428 offers significantly lower input voltage noise (1.5 nV/√Hz typical) compared to the AD8422 (8 nV/√Hz typical), but the AD8422 consumes less supply current (typically 300 µA vs. 6.5 mA for the AD8428).

Are the AD8422ARZ and AD8428ARZ-RL pin-compatible?

Both devices are offered in an 8-lead SOIC package, but pin compatibility must be verified against the respective manufacturer datasheets. The AD8422 and AD8428 have different pin functions and external component requirements, so they should not be treated as drop-in replacements without confirming the pinout and circuit configuration for each device.

What is the gain-setting method for each device?

The AD8422ARZ uses a single external resistor to set gain from 1 to 1000. The AD8428ARZ-RL has a fixed gain of 2000, set internally, and does not require an external gain resistor.

How do the input voltage noise specifications compare?

The AD8428ARZ-RL specifies a typical input voltage noise of 1.5 nV/√Hz at 1 kHz, making it suitable for low-level signal amplification. The AD8422ARZ specifies a typical input voltage noise of 8 nV/√Hz at 1 kHz, which is higher but still suitable for many precision applications where lower power consumption is prioritized.

How do the supply current requirements differ?

The AD8422ARZ typically draws 300 µA of supply current, making it well suited for battery-powered and low-power designs. The AD8428ARZ-RL typically draws 6.5 mA, reflecting its higher bandwidth and lower noise architecture, and is better suited to applications where power budget is less constrained.

What bandwidth can each amplifier achieve?

The AD8422ARZ provides a gain bandwidth product of 2.2 MHz (G = 1). The AD8428ARZ-RL provides a bandwidth of 3.5 MHz at its fixed gain of 2000. Actual usable bandwidth depends on the configured gain and external circuit conditions.

What is the significance of the -RL suffix on the AD8428ARZ-RL?

The -RL suffix indicates tape-and-reel packaging, which is intended for automated high-volume assembly. The AD8422ARZ is supplied in standard tube or tray packaging. Both are the same die and performance grade; only the packaging and shipping format differ.

Which device is better suited for low-power portable instrumentation?

The AD8422ARZ is generally better suited for low-power portable instrumentation due to its 300 µA typical supply current and 2.2 MHz gain bandwidth product. The AD8428ARZ-RL, with 6.5 mA supply current, is better suited to low-noise, high-gain precision measurement systems where power consumption is secondary.