ADF4002BCPZ-RL7
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 7422 PCS
- Package
- WFQFN-20
- Series
- Horário - Geradores de relógios, PLLs, Sintetizadores de Frequências
Esta comparação detalhada entre ADF4002BCPZ-RL7 e ADF4001BCP fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADF4001BCP is a viable functional replacement candidate for the ADF4002BCPZ-RL7 in PLL synthesizer applications, sharing the same core integer-N architecture, supply range, and 16-lead package footprint. Designers should validate the reduced maximum operating frequency and the absence of the on-chip reference doubler before committing to production substitution.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF4002BCPZ-RL7 | ADF4001BCP | Why it matters |
|---|---|---|---|
| Function | PLL Frequency Synthesizer (with integrated prescaler) | PLL Frequency Synthesizer (no integrated prescaler) | The ADF4002 includes an on-chip prescaler allowing higher input frequencies, while the ADF4001 requires an external prescaler for high-frequency operation, affecting circuit complexity and frequency range. |
| Maximum RF Input Frequency | 400 MHz | 200 MHz | Determines the highest reference or feedback frequency the PLL can accept; the ADF4002 supports higher frequencies, enabling wider application range. |
| Integrated Prescaler | Yes (dual-modulus, 8/9 or 16/17) | No | An integrated prescaler simplifies design and reduces external component count; its absence in the ADF4001 requires an external prescaler for high-frequency synthesis. |
| Supply Voltage Range | 2.7 V to 3.3 V | 2.7 V to 5.5 V | The wider supply range of the ADF4001 allows operation in 5 V systems, while the ADF4002 is limited to 3.3 V logic, affecting compatibility with existing rails. |
| Package | 20-Lead LFCSP (4 mm × 4 mm) | 20-Lead LFCSP (4 mm × 4 mm) | Both use the same footprint, allowing potential board-level interchangeability, though the "-RL7" suffix indicates tape-and-reel packaging versus the tray/loose form of the BCP variant. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature range means both parts suit the same environmental conditions. |
| Phase Detector Frequency | Up to 55 MHz | Up to 55 MHz | The phase detector frequency sets the comparison rate and affects loop bandwidth and phase noise; identical values mean similar loop dynamics. |
| Charge Pump Current | Programmable (up to 5 mA) | Programmable (up to 5 mA) | Charge pump current influences loop filter design and lock time; matching ranges allow similar loop filter topologies. |
| Serial Interface | 3-wire SPI-compatible | 3-wire SPI-compatible | Identical programming interface means firmware and microcontroller connections can be reused across both parts. |
| Power Consumption | ~11 mA typical | ~11 mA typical | Similar current draw means thermal and power budget considerations are equivalent for both devices. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF4002BCPZ-RL7 | ADF4001BCP |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Clock/Frequency Synthesizer (RF), Phase Detector | Clock Generator (RF) |
| PLL | Yes with Bypass | Yes |
| Input | CMOS, TTL | Clock |
| Output | Clock | Clock |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 400MHz | 200MHz |
| Divider / Multiplier | Yes/No | Yes/No |
| Voltage - Supply | 2.7V ~ 3.3V | 2.7V ~ 5.5V |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 1 | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADF4002BCPZ-RL7 is a 400 MHz PLL frequency synthesizer with an integrated phase detector and charge pump, supplied in a 20-lead LFCSP package and provided in tape-and-reel format (RL7). The ADF4001BCP is a 200 MHz PLL frequency synthesizer in a 20-lead LFCSP package supplied in a tray or tube. The ADF4002 offers a higher maximum operating frequency (400 MHz vs. 200 MHz) and includes a programmable charge pump current and phase detector polarity, while the ADF4001 provides a fixed charge pump current and is intended for lower-frequency applications.
Both devices are offered in a 20-lead LFCSP package with the same pin count, but pin functions and the internal register map differ. The ADF4002 includes additional control bits for charge pump current and phase detector polarity that are not present on the ADF4001. Therefore, they are not drop-in pin-compatible replacements; the PCB layout and register programming must be validated against the respective datasheets before substitution.
The ADF4002BCPZ-RL7 has a maximum RF input frequency of 400 MHz. The ADF4001BCP has a maximum RF input frequency of 200 MHz. Designs requiring operation above 200 MHz should use the ADF4002.
Both the ADF4002BCPZ-RL7 and the ADF4001BCP operate from a single supply of 2.7 V to 3.3 V. The digital interface (SPI-compatible) is also compatible with this supply range, allowing direct connection to 3 V logic.
The ADF4002BCPZ-RL7 features a programmable charge pump current with multiple selectable settings, allowing optimization of loop filter design and phase noise performance. The ADF4001BCP provides a fixed charge pump current. Designers requiring adjustable loop dynamics should select the ADF4002.
The ADF4002BCPZ-RL7 is supplied in a 20-lead LFCSP (4 mm × 4 mm) package in tape-and-reel format (RL7 suffix), suitable for automated assembly. The ADF4001BCP is supplied in a 20-lead LFCSP package in tray or tube format. Both packages share the same footprint dimensions, but the ordering suffix and packing method differ.
No. Although both are 20-lead LFCSP PLL synthesizers, the ADF4002 supports a higher maximum frequency (400 MHz vs. 200 MHz), has a programmable charge pump current, and uses a different register configuration. A direct substitution would require revalidation of the loop filter, register programming, and frequency plan against the ADF4001 datasheet. The ADF4001 should only be used where its 200 MHz limit and fixed charge pump are acceptable.
The ADF4002BCPZ-RL7 is typically used in wireless infrastructure, base station transceivers, and other applications requiring frequencies up to 400 MHz with adjustable loop dynamics. The ADF4001BCP is suited to lower-frequency applications such as consumer electronics, clock generation, and general-purpose frequency synthesis up to 200 MHz where a fixed charge pump current is sufficient.