ADM242AR vs ADM241LJRS

Esta comparação detalhada entre ADM242AR e ADM241LJRS fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM242AR and ADM241LJRS are both dual-channel RS-232 transceivers from Analog Devices with matching driver/receiver counts and supply voltage requirements, making the ADM241LJRS a viable functional substitute for the ADM242AR in most applications. However, the differing package footprints and on-chip charge pump configurations require layout verification before committing to a drop-in replacement.

Driver/Receiver Channel Count High match
Supply Voltage Range High match
Package Type Validation required
Charge Pump Configuration Validation required

Parts at a glance

Part A

ADM242AR

Analog Devices Inc.

Lifecycle
Active
Stock
6746 PCS
Package
SOIC-18
Series
Interface - Condutores, Receptores, Transceivers
Part B

ADM241LJRS

Analog Devices Inc.

Lifecycle
Active
Stock
8411 PCS
Package
SSOP-28
Series
Interface - Condutores, Receptores, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM242AR ADM241LJRS Why it matters
Number of Drivers/Receivers 2/2 4/0 Defines the interface direction and channel count; a 2/2 transceiver is bidirectional while a 4/0 device is a quad driver only, so they are not functionally interchangeable.
Data Rate 200 kbps 120 kbps Maximum supported signaling speed; the lower-rate part may not meet timing requirements of a system designed around the faster device.
Supply Voltage 5 V 5 V Both operate from a single 5 V rail, so power-supply compatibility is maintained between the two parts.
Number of Charge Pump Capacitors 4 4 External capacitor count affects board layout and BOM; matching counts simplifies a drop-in evaluation.
Operating Temperature Range -40 °C to +85 °C 0 °C to +70 °C The wider industrial range of the ADM242AR allows use in harsher environments where the commercial-grade ADM241LJRS may not be rated.
Package / Mounting 20-lead SOIC (surface mount) 28-lead SSOP (surface mount) Different footprints and pin counts mean the parts are not physically interchangeable on the same PCB without redesign.
Receiver Input Impedance 5 kΩ Not applicable (no receivers) RS-232 receiver input impedance affects bus loading; the ADM241LJRS has no receivers, so this parameter is irrelevant for that device.
ESD Protection (Human Body Model) ±15 kV ±15 kV Both offer the same robust ESD protection on the RS-232 I/O pins, an important reliability metric for interface parts.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM242AR ADM241LJRS
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Obsolete Obsolete
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 2/2 4/5
Duplex Full Full
Receiver Hysteresis 400 mV 650 mV
Data Rate 200kbps 120Kbps
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the ADM242AR and ADM241LJRS?

The ADM242AR is a dual-channel RS-232 line driver/receiver in a 16-lead SOIC package, specified for operation from a single 5 V supply. The ADM241LJRS is a lower-power variant in a 28-lead SSOP package that includes an on-board charge pump and shutdown capability. The ADM241LJRS is specified for 3.3 V or 5 V operation with reduced supply current, while the ADM242AR is a 5 V-only device. Package, pin count, and power consumption differ, so they are not drop-in replacements.

Are the ADM242AR and ADM241LJRS pin-compatible?

No. The ADM242AR uses a 16-lead SOIC package, while the ADM241LJRS uses a 28-lead SSOP package. The pin counts and pin functions differ, so the two devices cannot be interchanged on the same PCB footprint without a layout change.

What supply voltage does each device require?

The ADM242AR operates from a single 5 V supply. The ADM241LJRS is specified for operation from a 3.3 V or 5 V supply, making it suitable for mixed-voltage systems. Designs migrating between the two must verify that the supply rail and decoupling meet the target device's datasheet requirements.

How do the power consumption characteristics compare?

The ADM241LJRS is designed as a low-power RS-232 transceiver with reduced supply current compared with the ADM242AR. The ADM241LJRS also provides a shutdown mode that further reduces supply current when the interface is inactive. Exact quiescent and shutdown currents should be taken from the respective manufacturer datasheets for the specific grade.

Do both devices include an on-board charge pump for RS-232 levels?

Yes. Both the ADM242AR and ADM241LJRS integrate charge pump circuitry to generate the positive and negative RS-232 voltage levels from a single positive supply, eliminating the need for separate ±12 V rails. The external capacitor requirements differ between the two devices and must follow each datasheet.

What data rate and RS-232 channel configuration do these devices support?

Both are dual-channel RS-232 driver/receiver devices intended for serial communication interfaces. The ADM242AR provides two drivers and two receivers. The ADM241LJRS also provides two drivers and two receivers with an integrated charge pump. Maximum data rate depends on the specific grade and load capacitance; consult the manufacturer datasheet for the guaranteed rate.

Which device is better suited for a 3.3 V-only system?

The ADM241LJRS is the appropriate choice for a 3.3 V-only system because it is specified for 3.3 V operation. The ADM242AR is a 5 V device and is not specified for 3.3 V supply operation, so it should not be used in a 3.3 V-only design without verifying compliance against its datasheet.

What should be verified before substituting one device for the other in an existing design?

Verify package footprint and pinout, supply voltage range, charge pump capacitor values, shutdown and enable pin behavior, supply current budget, and guaranteed data rate against the manufacturer datasheets. Because the packages and pin counts differ, a direct PCB substitution is not possible; a layout revision and revalidation of the RS-232 interface are required.