ADS1259IPWR
Texas Instruments
- Lifecycle
- Active
- Stock
- 6414 PCS
- Package
- TSSOP-20
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS1259IPWR e ADS1202IPWRG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS1259IPWR and ADS1202IPWRG4 are not drop-in replacements for one another. The ADS1259IPWR is a 24-bit delta-sigma ADC with an SPI interface and integrated PGA, while the ADS1202IPWRG4 is a 16-bit delta-sigma modulator with a single-bit output and no integrated digital filter. Their differing resolution, output format, and interface architecture make them functionally incompatible for direct substitution.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1259IPWR | ADS1202IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma modulation, but their differing resolution and output formats make them suited to different measurement classes. |
| Output Interface / Format | SPI (serial digital) | Digital modulator bitstream (1-bit) | The ADS1259 delivers fully filtered digital codes over SPI, while the ADS1202 outputs a raw modulator bitstream requiring external digital filtering, affecting system design and host interface. |
| Input Type | Differential (single channel) | Differential (single channel) | Both accept differential inputs, but the ADS1259 integrates the full conversion path while the ADS1202 requires external signal conditioning and filtering. |
| Data Rate / Sample Rate | Up to ~14.4 kSPS (programmable) | Up to ~40 kSPS (modulator clock dependent) | Sample rate affects throughput and noise trade-offs; the ADS1202's higher modulator rate suits faster control loops, while the ADS1259 targets precision low-speed measurements. |
| Supply Voltage | 5 V analog / 2.7–5.25 V digital | 5 V (single supply) | Supply requirements determine power-rail compatibility; the ADS1259 offers more flexible digital supply options than the single-supply ADS1202. |
| Package | TSSOP-20 | TSSOP-8 | Package footprint and pin count affect PCB layout and board space; the ADS1202's smaller 8-pin package reflects its simpler modulator-only function. |
| Integrated Digital Filter | Yes (on-chip sinc filter) | No (external filter required) | An integrated filter simplifies design and reduces component count; the ADS1202 requires an external digital filter to produce usable conversion results. |
| Typical Application Focus | Precision industrial measurement / sensor digitization | Motor control / isolated current sensing | The intended application domain indicates functional substitutability; these parts target different system roles despite sharing delta-sigma architecture. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1259IPWR | ADS1202IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 14k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 1 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
| Features | PGA | - |
The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma ADC with an integrated low-noise PGA and SPI interface, designed for high-resolution DC and low-frequency measurement. The ADS1202IPWRG4 is a 16-bit, 40-kSPS delta-sigma modulator that outputs a 1-bit data stream for external digital filtering, typically used in isolated current-sense and motor-control applications. They differ fundamentally in resolution, output format, and intended signal chain architecture.
No. The ADS1259IPWR is a complete ADC with an SPI digital interface, while the ADS1202IPWRG4 is a modulator requiring an external digital filter and clock. Their pin functions, package pinouts, and surrounding circuitry requirements differ, so they are not direct substitutes and cannot be interchanged without redesign.
The ADS1259IPWR provides 24-bit resolution at data rates up to 14.4 kSPS. The ADS1202IPWRG4 is a 16-bit modulator with a maximum clock frequency of 10 MHz, corresponding to a 40-kSPS output word rate when paired with an appropriate digital filter. The ADS1259IPWR delivers fully processed conversion results, whereas the ADS1202IPWRG4 delivers a raw 1-bit stream.
The ADS1202IPWRG4 is typically preferred for isolated current-sense and motor-control applications because its 1-bit modulator output can be transmitted across an isolation barrier and processed by an external digital filter, such as an FPGA or DSP. The ADS1259IPWR, with its integrated PGA and SPI output, is better suited to non-isolated high-resolution DC measurement and sensor interface designs.
No. The ADS1259IPWR operates from an analog supply in the 4.75-V to 5.25-V range with a separate digital supply, and communicates over an SPI-compatible serial interface. The ADS1202IPWRG4 operates from a 5-V analog supply and a 2.7-V to 5.5-V digital supply, and outputs a 1-bit modulated data stream plus a clock signal rather than a standard serial word interface. Power-supply and interface design must be verified against each datasheet.
No. The ADS1202IPWRG4 is a delta-sigma modulator that produces a 1-bit oversampled data stream; it requires an external digital decimation filter (for example, in an FPGA, DSP, or microcontroller) to reconstruct a usable multi-bit conversion result. The ADS1259IPWR, by contrast, includes on-chip digital filtering and outputs finished conversion data over SPI.
Both devices are offered in TSSOP packages, but the specific pin counts and pinouts differ and must be confirmed from the respective manufacturer datasheets. The "IPWR" and "IPWRG4" suffixes denote tape-and-reel packaging and, for the G4 variant, lead-free/RoHS-compliant construction. Designers should verify package drawings, moisture sensitivity level, and ordering codes directly with the manufacturer or an authorized distributor before layout or procurement.