ADS7809UB vs ADS7800JU/1K

Esta comparação detalhada entre ADS7809UB e ADS7800JU/1K fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7809UB and ADS7800JU/1K are both 12-bit successive-approximation ADCs, but they differ in resolution-adjacent architecture, package, and interface details that prevent direct substitution. The ADS7809UB offers a higher sampling rate and a different package footprint, while the ADS7800JU/1K uses a distinct control interface and supply configuration. Designers must validate timing, layout, and interface compatibility before considering either part as a substitute.

Different package footprint Different sampling rate Different interface timing Different supply configuration

Parts at a glance

Part A

ADS7809UB

Texas Instruments

Lifecycle
Active
Stock
4394 PCS
Package
SOIC-20
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

ADS7800JU/1K

Texas Instruments

Lifecycle
Active
Stock
4118 PCS
Package
SOIC-24
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7800JU/1K Why it matters
Resolution 16 bit 12 bit Resolution determines the smallest analog signal change the ADC can distinguish; a 16-bit part offers far finer quantization than a 12-bit part, so they are not functionally interchangeable in precision applications.
Sampling Rate 100 kSPS 333 kSPS Maximum throughput limits the bandwidth of signals that can be digitized; the faster ADS7800 supports higher-frequency inputs than the ADS7809.
Input Type Single-ended Single-ended Input configuration affects how the analog source must be connected and whether differential signals can be measured directly.
Interface Serial (SPI/QSPI compatible) Parallel The digital interface must match the host controller; a serial device cannot directly replace a parallel device without redesigning the bus connection.
Supply Voltage 5 V 5 V Supply voltage compatibility ensures the part operates within the same power rail as the rest of the system.
Package 28-pin SOIC 24-pin SOIC Package footprint and pin count must match the PCB layout; different packages require board redesign and cannot be drop-in substituted.
Operating Temperature Range -40 °C to +85 °C 0 °C to +70 °C The temperature range determines suitability for industrial versus commercial environments; the wider range of the ADS7809 allows use in harsher conditions.
Integral Nonlinearity (INL) ±1.5 LSB (max) ±0.5 LSB (max) INL specifies deviation from an ideal transfer function and directly impacts measurement accuracy; the values are specified at different resolutions so absolute accuracy differs significantly.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7800JU/1K
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Active
Number of Bits 16 12
Sampling Rate(Per Second) 100k 333k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal Internal
Voltage - Supply, Analog 5V 5V, -11.4V ~ 16.5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809UB and the ADS7800JU/1K?

The ADS7809UB is a 16-bit successive-approximation ADC with a serial interface, while the ADS7800JU/1K is a 12-bit successive-approximation ADC with a parallel interface. The ADS7809UB offers higher resolution (16-bit vs 12-bit) and a serial output, whereas the ADS7800JU/1K provides a parallel data bus and is supplied in a 24-pin SOIC package in the /1K reel option.

Are the ADS7809UB and ADS7800JU/1K pin-compatible?

No. The ADS7809UB is offered in a 28-pin SOIC package, while the ADS7800JU/1K is offered in a 24-pin SOIC package. The different pin counts and pin functions mean they are not drop-in replacements for each other.

Do both devices support the same digital interface?

No. The ADS7809UB uses a serial interface for data output, while the ADS7800JU/1K uses a parallel interface. System designs must account for this difference in host controller connectivity and PCB routing.

How do the resolution and accuracy specifications compare?

The ADS7809UB provides 16-bit resolution, whereas the ADS7800JU/1K provides 12-bit resolution. Designers requiring finer quantization steps should select the ADS7809UB, while the ADS7800JU/1K may be sufficient for 12-bit applications.

What are the package and ordering differences between the two parts?

The ADS7809UB is supplied in a 28-pin SOIC package. The ADS7800JU/1K is supplied in a 24-pin SOIC package, with the /1K suffix indicating a tape-and-reel quantity of 1,000 units. Package footprint and reel quantity must be considered during procurement and PCB layout.

Can the ADS7800JU/1K be used as a direct substitute for the ADS7809UB in an existing design?

No. Due to differences in resolution (12-bit vs 16-bit), interface type (parallel vs serial), and package pin count (24-pin vs 28-pin), the ADS7800JU/1K is not a direct substitute for the ADS7809UB. Any substitution requires redesign of the interface and PCB layout, plus validation against the target system requirements.