ADS7809UB
Texas Instruments
- Lifecycle
- Active
- Stock
- 4394 PCS
- Package
- SOIC-20
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS7809UB e ADS7800KUG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS7809UB and ADS7800KUG4 are not drop-in replacements for one another. They differ in resolution, analog input architecture, digital interface, and package footprint, so substituting one for the other requires a full electrical and mechanical redesign rather than a direct swap.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809UB | ADS7800KUG4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 12 bit | Resolution determines the smallest analog increment the ADC can distinguish; a 16-bit device provides 16x finer quantization than a 12-bit device, directly affecting measurement precision and dynamic range. |
| Sampling Rate | 100 kSPS | 333 kSPS | Maximum throughput limits the highest signal frequency that can be digitized; the faster ADS7800 supports higher-bandwidth signals while the ADS7809 trades speed for resolution. |
| Input Type | Single-ended | Single-ended | Input configuration determines how the analog source must be connected; both are single-ended, so signal conditioning requirements are similar. |
| Supply Voltage | 5 V (single supply) | 5 V and -5 V (dual supply) | Supply requirements affect board-level power design; the ADS7809 runs from a single 5 V rail while the ADS7800 needs a bipolar supply, changing power architecture compatibility. |
| Interface | Serial (SPI/QSPI compatible) | Parallel | The digital interface dictates how the ADC connects to the host processor; serial reduces pin count and routing, while parallel offers higher data throughput and simpler timing. |
| Package | SOIC-28 | SOIC-24 | Package footprint and pin count determine PCB layout compatibility; different packages require board redesign and cannot be drop-in substituted. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range defines the environments in which the part is guaranteed to meet specifications; identical ranges mean similar environmental applicability. |
| Integral Nonlinearity (INL) | ±2 LSB (max) | ±0.5 LSB (max) | INL measures deviation from an ideal transfer function; lower INL yields more accurate absolute measurements, and the LSB weighting differs between the two resolutions. |
| Reference | Internal reference | Internal reference | An internal reference simplifies system design by removing the need for an external precision reference; both devices include one, easing analog front-end design. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809UB | ADS7800KUG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 16 | 12 |
| Sampling Rate(Per Second) | 100k | 333k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | Internal |
| Voltage - Supply, Analog | 5V | 5V, -11.4V ~ 16.5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7809UB is a 16-bit successive-approximation ADC with a serial interface, while the ADS7800KUG4 is a 12-bit successive-approximation ADC with a parallel interface. The ADS7809UB offers higher resolution (16-bit vs 12-bit) and a serial output, whereas the ADS7800KUG4 provides a parallel data bus and lower resolution. Both are single-channel ADCs, but they differ in resolution, interface type, and package.
No. The ADS7809UB is offered in a 28-pin SOIC package, while the ADS7800KUG4 is offered in a 28-pin SOIC package as well, but their pin functions and internal architectures differ due to different resolution and interface types (serial vs parallel). They are not pin-compatible and cannot be directly substituted without redesign.
The ADS7809UB provides 16-bit resolution with a maximum sampling rate of 100 kSPS. The ADS7800KUG4 provides 12-bit resolution with a maximum sampling rate of 333 kSPS. These parameters are verified from the respective manufacturer datasheets.
The ADS7809UB uses a serial interface for data output, which reduces pin count and simplifies isolation. The ADS7800KUG4 uses a parallel interface, providing simultaneous access to all data bits, which is suitable for high-speed microprocessor connections. The interface choice affects system design and PCB layout.
The ADS7809UB supports a bipolar input range of ±10 V (with a 20 Vpp input span) when configured appropriately, as specified in its datasheet. The ADS7800KUG4 supports a bipolar input range of ±10 V as well. Both devices are designed for industrial signal acquisition with wide input ranges.
No. Due to differences in resolution (16-bit vs 12-bit), interface type (serial vs parallel), and pin functions, the ADS7809UB is not a drop-in replacement for the ADS7800KUG4. A redesign of the digital interface and PCB layout would be required. Always verify against the latest manufacturer datasheets before substitution.
The ADS7809UB operates from a single +5 V supply for the analog and digital sections, with an additional +5 V or ±5 V for the input amplifier depending on configuration, as per its datasheet. The ADS7800KUG4 operates from a +5 V supply and a ±12 V or ±15 V supply for the analog section. Power supply design must account for these differences.
The ADS7809UB is better suited for high-resolution industrial measurement due to its 16-bit resolution, which provides finer quantization steps (approximately 305 µV per LSB over a ±10 V range) compared to the 12-bit ADS7800KUG4 (approximately 4.88 mV per LSB over a ±10 V range). However, the ADS7800KUG4 offers a faster sampling rate (333 kSPS vs 100 kSPS) for applications requiring higher throughput at lower resolution.