ADS7843E vs ADS7841ES/2K5G4

Esta comparação detalhada entre ADS7843E e ADS7841ES/2K5G4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7841ES/2K5G4 are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7843E is a dedicated 4-wire resistive touchscreen controller with an on-chip switch-driver matrix and pen-interrupt output, whereas the ADS7841ES/2K5G4 is a general-purpose 4-channel 12-bit ADC without touchscreen drive circuitry. Their interface timing, control-word format, and pin functions differ, so a direct board-level swap is not supported without redesign.

Different device function Different control interface Different pin functions Different input configuration

Parts at a glance

Part A

ADS7843E

Burr Brown

Lifecycle
Active
Stock
6691 PCS
Package
SSOP-16
Series
Acquisição de dados - Controladores de tela de toque
Part B

ADS7841ES/2K5G4

Texas Instruments

Lifecycle
Active
Stock
7893 PCS
Package
SSOP-16
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7841ES/2K5G4 Why it matters
Resolution 12-bit 12-bit Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability.
Number of Input Channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be multiplexed into the ADC.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing direct drop-in compatibility in most designs.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Matching supply ranges ensure the parts can operate in the same power domain.
Package / Mounting SSOP-16 (surface mount) SSOP-16 (surface mount) Identical package and footprint allow physical board-level interchangeability.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings mean both suit the same environmental conditions.
Sampling Rate Up to 125 kSPS Up to 200 kSPS Higher sampling rate in the ADS7841 allows faster signal acquisition, which may matter for high-speed applications.
Internal Reference External reference required External reference required Both require an external reference, so reference circuitry must be provided in either case.
Power Consumption Low power (approx. 500 µA at 5 V) Low power (approx. 500 µA at 5 V) Comparable power draw means similar thermal and battery-life impact in portable designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7841ES/2K5G4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 125°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the key functional differences between the ADS7843E and the ADS7841ES/2K5G4?

The ADS7843E is a 4-wire resistive touchscreen controller with an integrated 12-bit ADC and on-chip drivers for touchscreen panel switching. The ADS7841ES/2K5G4 is a standalone 12-bit, 4-channel serial ADC without touchscreen drive circuitry. The ADS7843E is designed specifically for touchscreen digitizer applications, while the ADS7841ES/2K5G4 is a general-purpose 4-channel ADC.

Do the ADS7843E and ADS7841ES/2K5G4 have the same pinout and package?

Both devices are offered in a 16-pin SSOP package, but their pin functions differ. The ADS7843E includes touchscreen drive outputs (X+, X-, Y+, Y-) and a PENIRQ output, whereas the ADS7841ES/2K5G4 provides four analog input channels (CH0–CH3) and does not include touchscreen drive or pen-interrupt functions. They are not pin-for-pin interchangeable.

Can the ADS7843E be directly substituted with the ADS7841ES/2K5G4 in an existing design?

No. The ADS7843E integrates touchscreen panel drive switches and a pen-interrupt output that the ADS7841ES/2K5G4 does not provide. A direct substitution would require external circuitry to drive the touchscreen panel and detect pen contact, and the pin functions are not compatible. Substitution requires full validation against the manufacturer datasheets and the target design.

What is the resolution and interface of each device?

Both the ADS7843E and the ADS7841ES/2K5G4 are 12-bit successive-approximation ADCs with a serial SPI-compatible interface. The ADS7843E is specified as a 12-bit touchscreen controller, and the ADS7841ES/2K5G4 is specified as a 12-bit, 4-channel serial ADC. Both use a serial interface for communication with a host controller.

What are the supply voltage requirements for the ADS7843E and ADS7841ES/2K5G4?

Both devices operate from a single supply in the 2.7 V to 5.25 V range, per their respective manufacturer datasheets. Designers should confirm the exact specified operating range and any reference voltage requirements in the official datasheet for each part before finalizing a design.

Which device is intended for touchscreen applications?

The ADS7843E is specifically designed as a 4-wire resistive touchscreen controller, integrating the analog switches needed to drive the touchscreen panel and a PENIRQ output for pen-contact detection. The ADS7841ES/2K5G4 is a general-purpose 4-channel ADC and does not include touchscreen drive or pen-interrupt functions, so it is not intended as a direct touchscreen controller replacement.

Are the ADS7843E and ADS7841ES/2K5G4 available in the same package type?

Both parts are offered in a 16-pin SSOP package. However, because the pin functions differ between the touchscreen controller and the general-purpose ADC, the package similarity does not imply electrical or functional interchangeability. Always verify package dimensions, pin assignments, and land patterns against the official datasheets.