ADS7843E
Burr Brown
- Lifecycle
- Active
- Stock
- 6691 PCS
- Package
- SSOP-16
- Series
- Acquisição de dados - Controladores de tela de toque
Esta comparação detalhada entre ADS7843E e ADS7842E/1KG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS7843E and ADS7842E/1KG4 are not drop-in replacements for one another. Although both are 12-bit touch screen controller ADCs from Texas Instruments, they differ in resolution, interface type, package, and channel configuration, so a direct substitution is not possible without design changes.
Burr Brown
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7842E/1KG4 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both are 12-bit ADCs, so resolution is equivalent for touchscreen coordinate digitizing. |
| Number of Input Channels | 4 single-ended / 2 differential | 4 single-ended / 2 differential | Channel count determines how many touchscreen axes or auxiliary inputs can be sampled. |
| Interface Type | SPI (serial) | SPI (serial) | A matching serial interface ensures the same host microcontroller communication protocol can be reused. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Compatible supply ranges allow the parts to operate in the same system power domain. |
| Package / Mounting | 16-SSOP (surface mount) | 16-SSOP (surface mount) | Identical package and footprint enable drop-in board replacement without layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Matching temperature ratings confirm suitability for the same industrial/commercial environments. |
| Touchscreen Controller Function | 4-wire resistive touchscreen controller | 4-wire resistive touchscreen controller | Both target 4-wire resistive panels, so the sensing topology and drive scheme are interchangeable. |
| Internal Reference | External reference required | External reference required | Both rely on an external reference, so the same reference circuit and accuracy budget apply. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7842E/1KG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | Parallel |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Features | - | Selectable Address |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface. The ADS7842E/1KG4 is a 4-channel, 12-bit parallel-output sampling ADC with an internal reference, designed for general-purpose data acquisition rather than touch screen control. The ADS7843E includes touch-pressure measurement and pen-interrupt output features, while the ADS7842E/1KG4 provides a parallel microprocessor interface and does not include touch screen control logic.
No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7842E/1KG4 is supplied in a 28-pin SSOP package. The two devices have different pin counts, pin functions, and PCB land patterns, so they are not drop-in replacements for one another.
No. The ADS7843E uses an SPI-compatible 3-wire serial interface for communication with a host controller. The ADS7842E/1KG4 uses a parallel interface with a data bus and control lines for direct connection to a microprocessor. The interface architectures are fundamentally different and require different host-side firmware and wiring.
Both devices are 12-bit successive-approximation register (SAR) ADCs. The ADS7843E is specified for touch screen coordinate conversion with a throughput rate up to 125 kHz. The ADS7842E/1KG4 provides a 12-bit parallel output with a specified conversion and throughput rate suitable for general-purpose sampling; designers should consult the respective manufacturer datasheet for the exact timing and throughput specifications.
Not directly. The ADS7843E is optimized for 4-wire resistive touch screen coordinate and pressure measurement, with its input configuration and control logic tailored to that application. The ADS7842E/1KG4 is a general-purpose 4-channel sampling ADC with a parallel output bus. Substitution would require validating input ranges, reference configuration, interface timing, and control logic against the target design, and is not a supported direct replacement.
The ADS7843E uses an external reference voltage applied to its VREF pin to set the ADC full-scale range. The ADS7842E/1KG4 includes an internal reference, though the reference configuration and any external reference options should be verified against the manufacturer datasheet for the specific grade and package.
Both devices are specified for a single-supply operation in the 2.7 V to 5.25 V range, with separate digital and analog supply considerations. Exact minimum, maximum, and recommended operating conditions should be confirmed from the official manufacturer datasheets for each device before design use.
No. The ADS7843E is intended for 4-wire resistive touch screen systems such as handheld devices, PDAs, and portable instruments. The ADS7842E/1KG4 is intended for general-purpose multi-channel data acquisition, industrial measurement, and microprocessor-based systems requiring a parallel ADC interface. Application suitability should be validated against each device's datasheet specifications.