AFE58JD28ZAV vs AFE5832LPZAV

Esta comparação detalhada entre AFE58JD28ZAV e AFE5832LPZAV fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AFE58JD28ZAV is a viable functional replacement candidate for the AFE5832LPZAV, sharing the same 32-channel ultrasound AFE architecture, FCBGA-289 package footprint, and 12-bit ADC resolution. Designers should validate the integrated digital demodulator, JESD204B interface configuration, and power consumption profile against their specific system requirements before committing to a drop-in substitution.

Channel Count High match
Package Type High match
Digital Interface Validation required
Power Consumption Validation required

Parts at a glance

Part A

AFE58JD28ZAV

Texas Instruments

Lifecycle
Active
Stock
7063 PCS
Package
NFBGA-289
Series
Acquisição de dados - Front End analógico (AFE)
Part B

AFE5832LPZAV

Texas Instruments

Lifecycle
Active
Stock
6726 PCS
Package
NFBGA-289
Series
Acquisição de dados - Front End analógico (AFE)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AFE5832LPZAV AFE58JD28ZAV Why it matters
Number of Channels 32 16 Channel count determines how many transducer elements can be simultaneously processed, directly affecting imaging system architecture and channel-count compatibility.
ADC Resolution 12 bit 12 bit ADC bit depth sets the dynamic range and quantization noise floor of the receive path, influencing image contrast and small-signal detectability.
Maximum Sampling Rate 80 MSPS 65 MSPS Sampling rate limits the maximum signal bandwidth and achievable axial resolution; a lower rate may restrict high-frequency probe support.
JESD204B Serial Lanes 16 lanes 8 lanes Lane count affects FPGA interface complexity and board routing; fewer lanes simplify the digital backend but constrain aggregate throughput.
Digital Demodulation / CW Doppler Not integrated Integrated Integrated continuous-wave Doppler and digital demodulation offload processing from the FPGA, which is critical for Doppler-capable ultrasound systems.
Package Type FCBGA (ZAV) FCBGA (ZAV) Package and pinout compatibility determine whether a drop-in board redesign is feasible or whether PCB layout changes are required.
Operating Temperature Range 0°C to 85°C 0°C to 85°C Temperature range confirms suitability for the target environment and must match system thermal design and reliability requirements.
Supply Voltage (Analog) 1.8 V / 3.3 V 1.8 V / 3.3 V Supply rail requirements affect power delivery design and compatibility with existing board-level voltage regulation.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AFE58JD28ZAV AFE5832LPZAV
Part Status Active Active
Number of Bits 12, 14 10, 12
Number of Channels 16 32
Power (Watts) 64 mW -
Voltage - Supply, Analog 3.15V ~ 3.6V -
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AFE5832LPZAV and AFE58JD28ZAV?

Both are Texas Instruments integrated analog front-end (AFE) devices for ultrasound imaging systems. The AFE5832LP is an 8-channel, low-power AFE with 12-bit ADC and digital I/Q demodulation, while the AFE58JD28 is a 16-channel AFE with 12-bit ADC, digital I/Q demodulation, and JESD204B serial output. Both are supplied in a 289-ball NFBGA (ZAV) package.

How do the channel counts of the AFE5832LPZAV and AFE58JD28ZAV differ?

The AFE5832LPZAV provides 8 receive channels, whereas the AFE58JD28ZAV provides 16 receive channels. This difference directly affects the number of transducer elements each device can support and the overall system channel density.

Do the AFE5832LPZAV and AFE58JD28ZAV use the same output interface?

No. The AFE5832LPZAV uses a low-power LVDS output interface, while the AFE58JD28ZAV uses a JESD204B high-speed serial output interface. The JESD204B interface reduces the number of PCB traces required for high channel counts, but it requires a compatible JESD204B receiver in the host FPGA or processor.

Are the AFE5832LPZAV and AFE58JD28ZAV pin-to-pin compatible?

Both devices are offered in the same 289-ball NFBGA (ZAV) package, but they are not functionally interchangeable. Pin assignments, supply requirements, and interface signals differ between the 8-channel AFE5832LP and the 16-channel AFE58JD28. A direct drop-in replacement should not be assumed without verifying the pinout and electrical specifications in the respective TI datasheets.

Which device is better suited for low-power portable ultrasound designs?

The AFE5832LPZAV is positioned as a low-power AFE and is generally more suitable for power-sensitive portable ultrasound systems. The AFE58JD28ZAV, with 16 channels and JESD204B output, is oriented toward higher-channel-count systems where the serial interface and channel density are prioritized over per-channel power.

What is the ADC resolution of both devices?

Both the AFE5832LPZAV and AFE58JD28ZAV integrate 12-bit analog-to-digital converters (ADCs). The 12-bit resolution is common to both devices, so selection between them should be based on channel count, output interface, and power rather than ADC resolution.

Can the AFE58JD28ZAV replace the AFE5832LPZAV in an existing design?

Not directly. Although both share the 289-ball ZAV package, the AFE58JD28ZAV has twice the channel count and uses a JESD204B output instead of LVDS. Replacing one with the other requires redesign of the interface, clocking, power delivery, and FPGA receiver logic, and must be validated against the TI datasheets for both devices.