AM26C31IDR vs AM26C31CDG4

Esta comparação detalhada entre AM26C31IDR e AM26C31CDG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26C31IDR and AM26C31CDG4 are functionally equivalent quad differential line drivers sharing the same RS-422/RS-485 interface architecture, supply voltage range, and logic family. Both devices are drop-in compatible in terms of electrical function and pinout, with the primary distinction being the manufacturer's temperature grade and packaging designation. Designers can substitute one for the other in most applications, provided the operating temperature range and package footprint are validated against the target design requirements.

Function and Logic Family High match
Supply Voltage Range High match
Package Type High match
Operating Temperature Range Validation required

Parts at a glance

Part A

AM26C31IDR

Texas Instruments

Lifecycle
Active
Stock
2239 PCS
Package
SOIC-16
Series
Interface - Condutores, Receptores, Transceivers
Part B

AM26C31CDG4

Texas Instruments

Lifecycle
Active
Stock
6972 PCS
Package
SOIC-16
Series
Interface - Condutores, Receptores, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26C31IDR AM26C31CDG4 Why it matters
Operating Temperature Range -40°C to 85°C 0°C to 70°C The industrial-grade IDR variant supports a wider temperature range, making it suitable for harsher environments where the commercial-grade CDG4 variant may not be rated.
Package / Mounting 16-SOIC, surface mount 16-SOIC, surface mount Both use the same SOIC package footprint, so they are physically interchangeable on a PCB despite the different ordering suffixes.
Product Grade / Series I-grade (industrial) C-grade (commercial) The grade designation reflects the qualified temperature and reliability screening; substituting one for the other affects environmental qualification of the end product.
Function Quad differential line driver (RS-422/RS-485) Quad differential line driver (RS-422/RS-485) Both are quad differential line drivers, so the core signal-driving function is identical and they are functionally substitutable.
Number of Drivers 4 4 Matching driver count ensures the same number of differential channels are available in the circuit.
Supply Voltage (VCC) 5 V (4.5 V to 5.5 V) 5 V (4.5 V to 5.5 V) Identical supply requirements mean the same power rail can be used without redesign.
Output Type Differential (3-state) Differential (3-state) Three-state differential outputs allow bus sharing and are electrically compatible between the two parts.
Data Rate Up to 10 Mbps Up to 10 Mbps Matching maximum data rate confirms both parts support the same signaling bandwidth for the application.
RoHS Compliance RoHS compliant RoHS compliant (G4 suffix) Both are RoHS compliant, so environmental/regulatory requirements are satisfied by either part.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26C31IDR AM26C31CDG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Driver
Number of Drivers/Receivers 4/0 4/0
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AM26C31IDR and AM26C31CDG4?

Both are quadruple differential line drivers from Texas Instruments, part of the AM26C31 family, designed to meet the requirements of ANSI TIA/EIA-422-B and ITU Recommendation V.11. They are used to drive balanced transmission lines in digital data transmission systems.

What is the difference between the AM26C31IDR and AM26C31CDG4?

The primary difference is the package and temperature grade. The AM26C31IDR is supplied in an SOIC-16 package (D suffix) and is specified for the industrial temperature range of -40°C to 85°C (I suffix). The AM26C31CDG4 is supplied in an SOIC-16 package (D suffix) and is specified for the commercial temperature range of 0°C to 70°C (C suffix); the G4 suffix indicates Pb-free/RoHS-compliant construction.

Are the AM26C31IDR and AM26C31CDG4 pin-compatible?

Yes. Both devices use the same 16-pin SOIC (D) package with identical pin assignments, so they are pin-compatible and share the same PCB land pattern.

Can the AM26C31IDR and AM26C31CDG4 be used interchangeably in a design?

They are functionally equivalent line drivers, but interchangeability depends on the operating temperature requirement. The AM26C31IDR supports -40°C to 85°C, while the AM26C31CDG4 supports only 0°C to 70°C. A design requiring industrial temperature operation must use the I-grade device; the C-grade device should not be substituted in that case.

What are the key electrical specifications common to both devices?

Both devices operate from a single 5 V supply, provide four differential line drivers, and are designed for balanced transmission lines. They feature high output impedance in the power-off condition, and are intended for use with RS-422/V.11-compatible receivers. Detailed AC and DC limits should be confirmed against the respective TI datasheet.

Do both parts meet the same industry standards?

Yes. Both the AM26C31IDR and AM26C31CDG4 are specified to meet ANSI TIA/EIA-422-B and ITU Recommendation V.11 requirements, as stated in the Texas Instruments datasheet for the AM26C31 family.

What does the G4 suffix on the AM26C31CDG4 indicate?

The G4 suffix denotes Pb-free (RoHS-compliant) construction per Texas Instruments ordering conventions. The AM26C31IDR is also available in Pb-free/RoHS-compliant form; designers should verify the specific ordering code and environmental compliance on the manufacturer datasheet.