AM26C31IDR vs AM26C31IDRG4

Esta comparação detalhada entre AM26C31IDR e AM26C31IDRG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26C31IDR and AM26C31IDRG4 are functionally equivalent quad differential line drivers from the same manufacturer family, sharing identical electrical characteristics, logic function, and package footprint. The only distinction is the tape-and-reel packing specification denoted by the G4 suffix, making them interchangeable for design and production purposes where reel packaging is acceptable.

Logic Function High match
Package Type High match
Electrical Characteristics High match
Packing Specification Validation required

Parts at a glance

Part A

AM26C31IDR

Texas Instruments

Lifecycle
Active
Stock
2239 PCS
Package
SOIC-16
Series
Interface - Condutores, Receptores, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26C31IDR AM26C31IDRG4 Why it matters
Function Quadruple differential line driver Quadruple differential line driver Both parts perform the same core function, so they are functionally interchangeable in the circuit.
Number of Drivers 4 4 The driver count must match to preserve the number of differential channels available in the design.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Matching supply range ensures the part operates correctly within the existing power rail of the system.
Output Type Differential (3-state) Differential (3-state) The 3-state differential output supports bus sharing and matches the signaling requirements of the interface.
Data Rate Up to 10 Mbps Up to 10 Mbps The maximum data rate must meet the application's signaling speed for reliable communication.
Package / Case 16-SOIC 16-SOIC Identical package and footprint allow drop-in replacement on the same PCB layout.
Mounting Type Surface Mount Surface Mount The mounting style must match the assembly process and board design.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C The temperature range must cover the application's environmental conditions for reliable operation.
Packaging / Reel Suffix Tape & Reel (R suffix) Tape & Reel, Green/RoHS (RG4 suffix) The suffix difference reflects reel/ordering and RoHS-green designation, which affects procurement and compliance but not electrical function.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26C31IDR AM26C31IDRG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Driver
Number of Drivers/Receivers 4/0 4/0
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between the AM26C31IDR and the AM26C31IDRG4?

The AM26C31IDR and AM26C31IDRG4 are functionally identical quad differential line drivers from Texas Instruments. The only difference is the packaging designation: the "G4" suffix indicates a green/RoHS-compliant lead finish (NiPdAu) and is otherwise the same device in the same SOIC-16 (D) package with the same electrical specifications. Both are specified for operation over the -40°C to +85°C temperature range.

Are the AM26C31IDR and AM26C31IDRG4 electrically and functionally interchangeable?

Yes. Both devices are the same quad differential line driver with identical logic function, pinout, supply voltage range (4.5 V to 5.5 V), and switching characteristics. The G4 suffix denotes a lead-free/RoHS-compliant finish, so they are interchangeable in function; the only consideration is whether the assembly process requires the specific lead finish indicated by the G4 designation.

What package and pin count do the AM26C31IDR and AM26C31IDRG4 use?

Both parts are supplied in the SOIC-16 (D) package with 16 pins. The "R" in the orderable part number indicates tape-and-reel packaging. Pinout and package dimensions are identical between the two variants.

What are the key electrical specifications of the AM26C31IDR/IDRG4?

Both are quad differential line drivers designed for balanced transmission lines, compliant with TIA/EIA-422-B and ITU-T V.11 recommendations. They operate from a single 5 V supply (4.5 V to 5.5 V), feature 3-state outputs, and are characterized for the -40°C to +85°C industrial temperature range. Refer to the Texas Instruments datasheet (AM26C31) for full parametric limits.

Does the G4 suffix affect RoHS compliance or lead finish?

Yes. The G4 suffix designates a green, RoHS-compliant lead finish (NiPdAu) on the AM26C31IDRG4. The AM26C31IDR is the standard orderable variant. Designers should confirm the required finish against their assembly and compliance requirements, but the electrical and functional behavior is the same.

Can the AM26C31IDR and AM26C31IDRG4 be used in the same PCB footprint?

Yes. Both are the same SOIC-16 (D) package with identical pin assignments and land patterns, so either variant can be placed on the same PCB footprint without layout changes.

Which applications are the AM26C31IDR and AM26C31IDRG4 intended for?

Both are intended for balanced differential data transmission over twisted-pair or parallel-wire lines, including RS-422/RS-485-type interfaces, industrial control, and point-to-point data links. They are specified for the industrial temperature range and are suitable wherever a quad 3-state differential line driver is required.