AM26LS32ACDR
Texas Instruments
- Lifecycle
- Active
- Stock
- 2449 PCS
- Package
- SOIC-16
- Series
- Interface - Condutores, Receptores, Transceivers
Esta comparação detalhada entre AM26LS32ACDR e AM26LS32ACDE4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AM26LS32ACDR and AM26LS32ACDE4 are functionally equivalent quad differential line receivers sharing identical device specifications, with the only distinction being the tape-and-reel versus tube packaging format. Both parts are suitable for the same RS-422/RS-423 and TIA/EIA-422/423 applications, and the choice between them should be driven solely by the assembly and procurement packaging requirements rather than by any electrical or functional difference.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS32ACDR | AM26LS32ACDE4 | Why it matters |
|---|---|---|---|
| Function | Quadruple differential line receiver | Quadruple differential line receiver | Both devices perform the same core function, so they are functionally interchangeable in a circuit. |
| Number of Receivers | 4 | 4 | The receiver count must match the number of differential signal channels required by the design. |
| Supply Voltage (VCC) | 5 V (4.75 V to 5.25 V) | 5 V (4.75 V to 5.25 V) | The operating supply range must be compatible with the system power rail for correct operation. |
| Input Type | Differential | Differential | Differential inputs provide noise immunity and are required for RS-422/RS-485 style signaling. |
| Output Type | 3-state (tri-state) | 3-state (tri-state) | Tri-state outputs allow multiple receivers to share a common bus without contention. |
| Operating Temperature Range | -40 °C to 85 °C | -40 °C to 85 °C | The temperature range must cover the application environment for reliable operation. |
| Package / Mounting | 16-SOIC, surface mount | 16-SOIC, surface mount | Package and mounting style must match the PCB footprint for physical compatibility. |
| Pin Count | 16 | 16 | Pin count and pinout must match to allow drop-in replacement on an existing board. |
| RoHS Compliance | RoHS compliant | RoHS compliant | RoHS status affects regulatory compliance and suitability for commercial products. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LS32ACDE4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Receiver | Receiver |
| Protocol | RS422, RS423 | RS422, RS423 |
| Number of Drivers/Receivers | 0/4 | 0/4 |
| Receiver Hysteresis | 50 mV | 50 mV |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
Both are quad differential line receivers from Texas Instruments that meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, and ITU Recommendation V.10/V.11. They are functionally identical devices; the difference lies in the ordering suffix, which denotes package and packing configuration.
The AM26LS32ACDR is supplied in a 16-pin SOIC package on large tape-and-reel (reel) packing, while the AM26LS32ACDE4 is the same 16-pin SOIC device in a tube/rail packing configuration. The "E4" suffix indicates Pb-free (RoHS-compliant) tube packaging; both parts are electrically and functionally equivalent.
Yes. Both devices share the same datasheet specifications: quad differential receivers with ±7 V common-mode range, 3-state outputs, and input sensitivity of ±200 mV. They differ only in shipping/packaging format, so they are interchangeable in circuit design.
Both the AM26LS32ACDR and AM26LS32ACDE4 operate from a single 5 V supply (nominal), with the datasheet specifying a recommended operating supply voltage of 4.75 V to 5.25 V.
The AM26LS32ACDR and AM26LS32ACDE4 both feature a common-mode input voltage range of ±7 V, allowing them to handle ground potential differences in balanced transmission systems.
Yes. Both the AM26LS32ACDR and AM26LS32ACDE4 provide three-state (tri-state) outputs controlled by a common enable pin, permitting direct connection to a bus-oriented system.
Both parts are offered in a 16-pin SOIC (small-outline integrated circuit) package. The "D" in the part number designates the SOIC package; the "R" suffix indicates tape-and-reel, and the "E4" suffix indicates Pb-free tube packing.
Both devices are designed to meet TIA/EIA-422-B, TIA/EIA-423-B, and ITU Recommendation V.10/V.11 standards for balanced and unbalanced digital data transmission.