AM26LS32ACDR
Texas Instruments
- Lifecycle
- Active
- Stock
- 2449 PCS
- Package
- SOIC-16
- Series
- Interface - Condutores, Receptores, Transceivers
Esta comparação detalhada entre AM26LS32ACDR e AM26LS32ACNSRG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AM26LS32ACDR and AM26LS32ACNSRG4 are functionally equivalent quad differential line receivers sharing the same device core, logic family, and electrical characteristics; the primary distinction is package and packing format, so the AM26LS32ACNSRG4 is a viable functional replacement for the AM26LS32ACDR provided the board layout accommodates the alternate package footprint and reel configuration.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS32ACDR | AM26LS32ACNSRG4 | Why it matters |
|---|---|---|---|
| Function | Quadruple Differential Line Receiver | Quadruple Differential Line Receiver | Both devices perform the same core function, so they are functionally interchangeable in RS-422/RS-423/RS-485 receive applications. |
| Number of Receivers | 4 | 4 | Receiver count determines how many differential channels can be handled per package; identical count means equivalent channel capacity. |
| Supply Voltage (VCC) | 5 V (nominal) | 5 V (nominal) | Both require the same nominal 5 V supply, so power supply design does not need to change between the two parts. |
| Input Type | Differential | Differential | Differential inputs provide common-mode noise immunity; matching input type ensures signal compatibility. |
| Output Type | 3-State (Tri-state) | 3-State (Tri-state) | Tri-state outputs allow bus sharing; identical output type means the same bus architecture can be used. |
| Package / Case | SOIC-16 (16-SOIC, 3.90 mm width) | SO-16 (16-SO, 5.30 mm width) | Different package body widths affect PCB footprint and layout; the board must be designed for the specific package. |
| Mounting Type | Surface Mount | Surface Mount | Both are surface-mount, but the differing package footprint means they are not drop-in replacements on the same pad layout. |
| Packaging / Reel | Tape & Reel (large reel) | Tape & Reel (smaller reel) | Reel size affects manufacturing line handling and minimum order quantities, though not electrical performance. |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C | Identical temperature range means both suit the same commercial-grade environments. |
| RoHS Compliance | RoHS Compliant | RoHS Compliant | Both meet RoHS, so environmental/regulatory compliance is equivalent for either part. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LS32ACNSRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Receiver | Receiver |
| Protocol | RS422, RS423 | RS422, RS423 |
| Number of Drivers/Receivers | 0/4 | 0/4 |
| Receiver Hysteresis | 50 mV | 50 mV |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
Both are quad differential line receivers from Texas Instruments that meet the requirements of TIA/EIA-422-B and TIA/EIA-423-B, as well as ITU Recommendation V.10 and V.11. They are designed to receive balanced or unbalanced digital data over twisted-pair or parallel-wire lines and provide complementary outputs.
The primary difference is the package and packing format. The AM26LS32ACDR is supplied in a 16-pin SOIC package (D suffix) on a 2,500-unit reel, while the AM26LS32ACNSRG4 is supplied in a 16-pin SOP package (NS suffix) on a 2,000-unit reel. Both use the same die and electrical specifications.
Yes. Both devices share identical electrical characteristics, including a common-mode input voltage range of -7 V to +7 V, a sensitivity of ±200 mV, and a supply voltage range of 4.75 V to 5.25 V. They differ only in package type and reel quantity, so they are electrically interchangeable when the PCB footprint is compatible.
Not as direct drop-in replacements without PCB changes. The AM26LS32ACDR uses a 16-pin SOIC (D) footprint, while the AM26LS32ACNSRG4 uses a 16-pin SOP (NS) footprint. The land patterns and package body dimensions differ, so the PCB layout must be verified before substitution.
Both devices operate from a single 5 V supply (4.75 V to 5.25 V), feature a common-mode input voltage range of -7 V to +7 V, a differential input sensitivity of ±200 mV, and provide 3-state outputs. They are specified for operation over the -40 °C to +85 °C temperature range.
The AM26LS32ACDR is supplied on a 2,500-unit reel, while the AM26LS32ACNSRG4 is supplied on a 2,000-unit reel. This affects procurement and inventory planning but not device performance.
Yes. Both the AM26LS32ACDR and AM26LS32ACNSRG4 provide 3-state outputs controlled by a common enable input, allowing the receiver outputs to be placed in a high-impedance state for bus-oriented applications.