AMC1300BDWV
Texas Instruments
- Lifecycle
- Active
- Stock
- 6086 PCS
- Package
- SOIC-8
- Series
- Linear - Amplifiers - Special Purpose
Esta comparação detalhada entre AMC1300BDWV e AMC1305M25DWR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AMC1305M25DWR and AMC1300BDWV are both isolated delta-sigma modulators sharing a common functional role, but they differ in input voltage range, output interface, and isolation rating. The AMC1305M25DWR is a ±250 mV input modulator with a single-ended CMOS output, while the AMC1300BDWV offers a ±50 mV input range with a differential output. Designers should validate input signal scaling, digital interface compatibility, and isolation requirements before substituting one for the other in a given application.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1305M25DWR | AMC1300BDWV | Why it matters |
|---|---|---|---|
| Input Type | Current shunt (isolated delta-sigma modulator) | Voltage (isolated amplifier) | Determines whether the device measures current via a shunt or amplifies a voltage signal, which fundamentally changes the sensing circuit topology. |
| Output Format | 1-bit digital bitstream (delta-sigma) | Analog differential output | A digital bitstream requires an external digital filter/decoder, while an analog output feeds directly into an ADC or controller, affecting system architecture. |
| Isolation Rating | 5000 V RMS (reinforced) | 5000 V RMS (reinforced) | Both provide reinforced isolation, but confirming the rating ensures safe galvanic separation in high-voltage applications. |
| Input Voltage Range | ±250 mV (shunt input) | ±250 mV (linear input range) | Defines the maximum signal swing the device can accept; matching this to the sensor output prevents clipping and preserves accuracy. |
| Supply Voltage | 3.3 V (high side) / 3.3 V or 5 V (low side) | 3.3 V to 5.5 V (both sides) | Supply requirements affect power rail design and compatibility with the host controller and isolated power scheme. |
| Gain | Fixed (modulator, no analog gain) | Fixed gain of 8.2 V/V | Gain determines the signal scaling; a fixed analog gain versus a modulator output changes how the downstream system interprets the signal. |
| Package | SOIC-16 (wide body) | SOIC-8 (wide body) | Package footprint and pin count affect PCB layout and whether the parts are drop-in compatible. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Both cover the industrial range, ensuring reliable operation across harsh environments. |
| Bandwidth | Up to ~20 MHz clock (modulator) | ~100 kHz (analog) | Bandwidth limits the maximum signal frequency the device can faithfully process, impacting control-loop speed and measurement fidelity. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1300BDWV | AMC1305M25DWR |
|---|---|---|
| Part Status | Active | Active |
| Type | Isolation | Isolated Module |
| Applications | Current Sensing, Power Management | - |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | - | 78k |
| Data Interface | - | CMOS, Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 3V ~ 5.5V |
| Operating Temperature | - | -40°C ~ 125°C |
The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range and a fixed 20-MHz clock, designed for shunt-based current sensing with direct digital output. The AMC1300BDWV is a reinforced isolated amplifier with a ±250-mV input range and a differential analog output, intended for use with an external ADC. The key difference is the output type: the AMC1305M25DWR provides a 1-bit delta-sigma bitstream, while the AMC1300BDWV provides an analog differential signal.
No. Both devices are offered in an 8-pin SOIC (DWV) package, but their pin functions differ. The AMC1305M25DWR provides a clock input and a data output, whereas the AMC1300BDWV provides an analog differential output pair (VOUTP/VOUTN). Therefore, they are not direct pin-to-pin replacements and require different PCB routing and interface circuitry.
Both the AMC1305M25DWR and the AMC1300BDWV specify a linear input voltage range of ±250 mV, making them suitable for low-side shunt resistor current sensing in motor drive and inverter applications.
Both devices are reinforced isolated components rated for a maximum isolation voltage of 5000 V RMS per the respective Texas Instruments datasheets, and both are qualified to the same reinforced isolation standards for industrial applications.
The AMC1305M25DWR is the appropriate choice when the system includes a digital filter or microcontroller capable of processing a 1-bit delta-sigma bitstream, since it outputs a modulated digital data stream clocked at 20 MHz. The AMC1300BDWV is preferred when the signal chain uses a separate external ADC, because it provides a differential analog output.
Yes. Both the AMC1305M25DWR and the AMC1300BDWV use a high-side supply (AVDD) of 3.0 V to 5.5 V and a low-side supply (DVDD) of 3.0 V to 5.5 V, allowing them to share a common power architecture in isolated sensing designs.
The AMC1305M25DWR is typically used in shunt-based current sensing for motor drives, inverters, and renewable energy systems where a digital bitstream is processed by an MCU or FPGA. The AMC1300BDWV is typically used in the same current-sensing applications but with an external ADC in the signal chain, such as in industrial motor control and power conversion systems.