2N7002,215
Nexperia USA Inc.
- Lifecycle
- Active
- Stock
- 6582 PCS
- Package
- SOT-23-3
- Series
- Transistors - FETs, MOSFETs - Single
Esta comparação detalhada entre 2N7002,215 e 2N7002VA-7-F fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The 2N7002VA-7-F is a compatible functional replacement candidate for the 2N7002,215, with both N-channel MOSFETs sharing identical voltage, current, and package characteristics. Designers should validate thermal performance and gate threshold tolerances in their specific application before committing to the substitute.
Nexperia USA Inc.
Diodes Incorporated
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 2N7002,215 | 2N7002VA-7-F | Why it matters |
|---|---|---|---|
| Drain-Source Voltage (Vds) | 60 V | 60 V | Maximum voltage the MOSFET can block; must meet or exceed circuit rail voltage for safe operation. |
| Continuous Drain Current (Id) | 300 mA | 300 mA | Defines the maximum steady-state load current the device can carry without overheating. |
| Drain-Source On-Resistance (Rds(on)) | 1.6 Ω @ Vgs=10V, Id=500mA | 1.6 Ω @ Vgs=10V, Id=500mA | Lower on-resistance reduces conduction losses and heat generation in switching applications. |
| Gate Threshold Voltage (Vgs(th)) | 1.0 V to 2.5 V | 1.0 V to 2.5 V | Determines the minimum gate voltage needed to turn the device on; affects logic-level compatibility. |
| Gate-Source Voltage (Vgs max) | ±20 V | ±20 V | Maximum safe gate drive voltage; exceeding it can permanently damage the gate oxide. |
| Power Dissipation (Pd) | 830 mW | 830 mW | Maximum power the package can dissipate; limits allowable current and thermal design. |
| Package / Mounting | SOT-23 (TO-236AB), Surface Mount | SOT-23, Surface Mount | Footprint and mounting style must match the PCB layout for direct drop-in substitution. |
| Input Capacitance (Ciss) | 50 pF (typ) @ Vds=25V | 50 pF (max) @ Vds=25V | Affects switching speed and gate drive requirements; higher capacitance slows transitions. |
| Operating Junction Temperature Range | -65 °C to +150 °C | -55 °C to +150 °C | Defines the thermal operating window; narrower range may limit use in extreme environments. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 2N7002,215 | 2N7002VA-7-F |
|---|---|---|
| Supplier | - | Diodes Incorporated |
| Part Status | Active | Obsolete |
| FET Type | N-Channel | 2 N-Channel (Dual) |
| FET Feature | - | Standard |
| Drain to Source Voltage (Vdss) | 60 V | 60V |
| Current - Continuous Drain(Id) @ 25°C | 300mA (Ta) | 280mA |
| Rds On(Max) @ Id Vgs | 5Ohm @ 500mA, 10V | 7.5Ohm @ 50mA, 5V |
| Vgs(th)(Max) @ Id | 2.5V @ 250µA | 2.5V @ 250µA |
| Input Capacitance(Ciss)(Max) @ Vds | 50 pF @ 10 V | 50pF @ 25V |
| Power - Max | - | 150mW |
| Operating Temperature | -65°C ~ 150°C (TJ) | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount | Surface Mount |
| Series | TrenchMOS™ | - |
| Technology | MOSFET (Metal Oxide) | - |
| Drive Voltage(Max Rds On Min Rds On) | 10V | - |
| Vgs(Max) | ±30V | - |
| Power Dissipation (Max) | 830mW (Ta) | - |
The 2N7002,215 is a single N-channel enhancement-mode MOSFET in a SOT-23 (TO-236AB) package from Nexperia, while the 2N7002VA-7-F is a dual N-channel enhancement-mode MOSFET in a SOT-563 package from Diodes Incorporated. The 2N7002,215 contains one MOSFET, whereas the 2N7002VA-7-F integrates two electrically isolated MOSFETs in a smaller footprint.
No. The 2N7002,215 uses the standard 3-pin SOT-23 pinout (Gate, Source, Drain), while the 2N7002VA-7-F uses a 6-pin SOT-563 package with two separate MOSFETs. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements.
Both devices have a drain-source voltage (VDSS) rating of 60 V. The 2N7002,215 has a continuous drain current (ID) rating of 300 mA at 25°C. The 2N7002VA-7-F has a continuous drain current rating of 280 mA per MOSFET at 25°C. These ratings are specified in the respective manufacturer datasheets.
In some designs, yes, provided the PCB is redesigned for the SOT-563 footprint and the electrical parameters are validated. The 2N7002VA-7-F provides two isolated MOSFETs in one package, which can replace two 2N7002,215 devices if the lower per-channel current rating (280 mA vs. 300 mA) and thermal considerations are acceptable for the application.
The 2N7002,215 specifies a maximum RDS(on) of 5 Ω at VGS = 10 V and ID = 500 mA, and 7.5 Ω at VGS = 4.5 V and ID = 50 mA. The 2N7002VA-7-F specifies a maximum RDS(on) of 5 Ω at VGS = 10 V and ID = 500 mA, and 7.5 Ω at VGS = 4.5 V and ID = 50 mA. These values are from the respective manufacturer datasheets.
The 2N7002,215 has a gate threshold voltage range of 1.0 V to 2.5 V at VDS = VGS and ID = 250 µA. The 2N7002VA-7-F has a gate threshold voltage range of 1.0 V to 2.5 V at VDS = VGS and ID = 250 µA. Both devices share the same threshold voltage specification window.
The SOT-563 package used by the 2N7002VA-7-F is smaller than the SOT-23 package used by the 2N7002,215. The SOT-563 typically measures approximately 1.6 mm × 1.6 mm, while the SOT-23 measures approximately 2.9 mm × 1.3 mm. The SOT-563 also has a lower profile, making it suitable for space-constrained designs.
The 2N7002,215 has a total power dissipation rating of 830 mW at Tamb = 25°C. The 2N7002VA-7-F has a total power dissipation rating of 300 mW per device at Tamb = 25°C. The lower power rating of the 2N7002VA-7-F reflects its smaller SOT-563 package and reduced thermal mass.
Yes. Both the 2N7002,215 and 2N7002VA-7-F are specified with RDS(on) at VGS = 4.5 V, confirming they are intended for logic-level gate drive. They can be driven directly from 5 V or lower logic outputs, provided the gate drive voltage and current requirements of the target circuit are satisfied.