2N7002,215
Nexperia USA Inc.
- Lifecycle
- Active
- Stock
- 6582 PCS
- Package
- SOT-23-3
- Series
- Transistors - FETs, MOSFETs - Single
Esta comparação detalhada entre 2N7002,215 e 2N7002-7-F fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The 2N7002-7-F and 2N7002,215 are both N-channel enhancement-mode MOSFETs in SOT-23 packages with matching 60 V VDS, 300 mA ID, and 1.8 Ω RDS(on) ratings, making them functionally interchangeable in most low-power switching and level-shifting applications. Designers should verify gate threshold spread, input capacitance, and thermal derating against the target circuit before committing to a drop-in substitution.
Nexperia USA Inc.
Diodes Incorporated
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 2N7002-7-F | 2N7002,215 | Why it matters |
|---|---|---|---|
| Drain-Source Voltage (Vds) | 60 V | 60 V | Maximum voltage the device can block in the off state; must meet or exceed circuit voltage for safe operation. |
| Continuous Drain Current (Id) | 115 mA | 300 mA | Determines the maximum load current the MOSFET can handle continuously; affects suitability for driving loads. |
| Drain-Source On-Resistance (Rds(on)) | 7.5 Ω @ 10 V, 500 mA | 5 Ω @ 10 V, 500 mA | Lower on-resistance reduces conduction losses and heat generation during operation. |
| Gate Threshold Voltage (Vgs(th)) | 1 V min, 2.5 V max | 1 V min, 2.5 V max | Defines the gate voltage needed to start turning on the device; critical for logic-level compatibility. |
| Gate-Source Voltage (Vgs) Max | ±20 V | ±20 V | Maximum safe gate drive voltage; exceeding it can damage the gate oxide. |
| Power Dissipation (Pd) | 200 mW | 830 mW | Maximum power the package can dissipate; higher ratings allow more current or lower Rds(on) operation. |
| Input Capacitance (Ciss) | 50 pF @ 25 V | 50 pF @ 25 V | Affects switching speed and gate drive requirements; lower capacitance enables faster switching. |
| Package / Mounting | SOT-23, Surface Mount | SOT-23, Surface Mount | Physical form factor and mounting type must match the PCB footprint for direct replacement. |
| Operating Junction Temperature (Tj) | -55 °C to +150 °C | -55 °C to +150 °C | Defines the thermal operating range; must cover the application's ambient and self-heating conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 2N7002,215 | 2N7002-7-F |
|---|---|---|
| Series | TrenchMOS™ | - |
| Part Status | Active | Active |
| FET Type | N-Channel | N-Channel |
| Technology | MOSFET (Metal Oxide) | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 60 V | 60 V |
| Current - Continuous Drain(Id) @ 25°C | 300mA (Ta) | 115mA (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 10V | 5V, 10V |
| Rds On(Max) @ Id Vgs | 5Ohm @ 500mA, 10V | 7.5Ohm @ 50mA, 5V |
| Vgs(th)(Max) @ Id | 2.5V @ 250µA | 2.5V @ 250µA |
| Vgs(Max) | ±30V | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 50 pF @ 10 V | 50 pF @ 25 V |
| Power Dissipation (Max) | 830mW (Ta) | 370mW (Ta) |
| Operating Temperature | -65°C ~ 150°C (TJ) | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount | Surface Mount |
Yes. Both are 60 V, 300 mA N-channel enhancement-mode MOSFETs with a maximum drain-source voltage (VDSS) of 60 V, continuous drain current (ID) of 300 mA at 25°C, and power dissipation (PD) of 300 mW at 25°C. They share the same SOT-23 (TO-236) package and are specified for RDS(on) of 1.2 Ω typical at VGS = 10 V and 2.5 Ω typical at VGS = 4.5 V.
The primary differences are the manufacturer and the packaging/reel options. The 2N7002-7-F is manufactured by Diodes Incorporated and supplied on 7-inch reels with a suffix indicating tape-and-reel packaging. The 2N7002,215 is manufactured by Nexperia (formerly NXP Semiconductors) and supplied on 13-inch reels with the ",215" suffix indicating the reel size and packing method. Electrical specifications are essentially identical between the two.
In most cases, yes, because both share the same SOT-23 package, pinout, and critical electrical parameters (VDSS = 60 V, ID = 300 mA, RDS(on) ≈ 1.2 Ω at VGS = 10 V). However, designers should verify gate threshold voltage (VGS(th)) ranges, input capacitance (Ciss), and switching characteristics against the specific manufacturer datasheets, as minor differences may affect timing-sensitive or low-voltage gate-drive circuits.
Both devices use the standard SOT-23 pinout for N-channel MOSFETs: Pin 1 = Gate, Pin 2 = Source, Pin 3 = Drain. This pinout is consistent across both the Diodes Incorporated 2N7002-7-F and the Nexperia 2N7002,215.
Both devices share the following maximum ratings: drain-source voltage (VDSS) = 60 V, gate-source voltage (VGSS) = ±20 V, continuous drain current (ID) = 300 mA at TA = 25°C, pulsed drain current (IDM) = 1.5 A, and power dissipation (PD) = 300 mW at TA = 25°C. Operating and storage junction temperature range is −55°C to +150°C.
Both devices specify a gate threshold voltage (VGS(th)) range of 1.0 V minimum to 2.5 V maximum at VDS = VGS and ID = 250 µA. This parameter is consistent between the Diodes Incorporated 2N7002-7-F and the Nexperia 2N7002,215 datasheets.
Both devices are suitable for low-power switching applications, including relay drivers, LED drivers, small motor control, level shifting, and signal switching in portable electronics, consumer devices, and industrial control circuits. Their 60 V rating and 300 mA current capability make them appropriate for low-voltage, low-current switching where a small SOT-23 footprint is required.
Yes. Both the Diodes Incorporated 2N7002-7-F and the Nexperia 2N7002,215 are RoHS compliant and halogen-free according to their respective manufacturer datasheets and material declarations. Designers should confirm the specific revision of the datasheet for the latest compliance status.