AD7495BRZ vs AD7492AR

Esta comparação detalhada entre AD7495BRZ e AD7492AR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7495BRZ and AD7492AR are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible SOIC-8 footprint and similar supply requirements, making the AD7495BRZ a viable functional replacement candidate for the AD7492AR in many designs. However, the two parts differ in maximum sampling throughput and interface timing characteristics, so engineers should validate SPI clock timing and throughput margins against the target application before substituting.

Resolution High match
Package Type High match
Sampling Rate Validation required
Interface Timing Validation required

Parts at a glance

Part A

AD7495BRZ

Analog Devices Inc.

Lifecycle
Active
Stock
2494 PCS
Package
SOIC-8
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

AD7492AR

Analog Devices Inc.

Lifecycle
Active
Stock
6037 PCS
Package
SOIC-24
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7495BRZ AD7492AR Why it matters
Resolution 12 bit 12 bit Both converters provide 12-bit resolution, so quantization step size and nominal dynamic range are equivalent.
Sampling Rate 1 MSPS 1.25 MSPS The maximum throughput differs; the AD7492AR can sample faster, which affects achievable signal bandwidth and timing margin in a system.
Number of Input Channels 1 1 Both are single-channel ADCs, so neither offers multiplexed multi-channel acquisition on-chip.
Input Type Single-ended Single-ended Single-ended inputs simplify front-end design but offer less common-mode rejection than differential inputs.
Supply Voltage 5 V 5 V Both operate from a 5 V supply, so power rail requirements are compatible for direct substitution.
Interface SPI / QSPI / MICROWIRE / DSP compatible serial Parallel The digital interface differs fundamentally: the AD7495BRZ uses a serial bus while the AD7492AR uses a parallel bus, requiring different host connections and pinouts.
Package / Mounting 8-Lead SOIC (surface mount) 28-Lead TSSOP (surface mount) Different package footprints and pin counts mean the parts are not drop-in replacements on an existing PCB.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ratings allow use in the same environmental conditions.
Power Consumption Approx. 4.5 mW at 5 V, 1 MSPS Approx. 15 mW at 5 V, 1.25 MSPS Lower power dissipation in the AD7495BRZ benefits thermally constrained or battery-influenced designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7495BRZ AD7492AR
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 1M 1M
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External Internal
Voltage - Supply, Analog 2.7V ~ 5.25V 2.7V ~ 5.25V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the AD7495BRZ and AD7492AR?

The AD7495BRZ is a 12-bit successive-approximation ADC with a serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, supplied in an 8-lead SOIC package. The AD7492AR is a 12-bit SAR ADC with a parallel (byte-wide) interface, supplied in a 24-lead SOIC package. Both operate from a single 2.7 V to 5.25 V supply and offer a 1 MSPS throughput rate, but they differ in digital interface, package, and pin count.

Are the AD7495BRZ and AD7492AR pin-compatible or footprint-compatible?

No. The AD7495BRZ uses an 8-lead SOIC (R-8) package, while the AD7492AR uses a 24-lead SOIC (R-24) package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements and require different board layouts.

Do the AD7495BRZ and AD7492AR have the same resolution and throughput?

Yes. Both are 12-bit successive-approximation ADCs specified for a 1 MSPS maximum throughput rate, allowing direct comparison of resolution and sampling speed when selecting between them.

What digital interface does each device use?

The AD7495BRZ provides a serial interface compatible with SPI, QSPI, MICROWIRE, and DSP systems, which minimizes pin count and board routing. The AD7492AR provides a parallel byte-wide interface for direct connection to a microprocessor or DSP data bus, which can simplify interfacing in parallel-bus systems at the cost of more pins.

What are the supply voltage and reference requirements for these ADCs?

Both the AD7495BRZ and AD7492AR operate from a single supply in the 2.7 V to 5.25 V range. Each device requires an external reference voltage to set the full-scale input range; the reference is not internally generated, so the system design must provide a suitable external reference.

What are the operating temperature ranges for the AD7495BRZ and AD7492AR?

Both devices are specified for the industrial temperature range of −40 °C to +85 °C, making them suitable for industrial and embedded applications requiring extended temperature operation.

Can the AD7495BRZ and AD7492AR be used interchangeably in an existing design?

Not directly. Because the AD7495BRZ uses a serial interface in an 8-lead package and the AD7492AR uses a parallel interface in a 24-lead package, substituting one for the other requires a PCB redesign, changes to the digital interface firmware or logic, and revalidation of the analog front end against the datasheet specifications.