AD7495BRZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2494 PCS
- Package
- SOIC-8
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre AD7495BRZ e AD7492ARZ-5 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD7495BRZ and AD7492ARZ-5 are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible serial interface and reference architecture, making the AD7495BRZ a viable functional replacement candidate for the AD7492ARZ-5 in many designs. However, the two parts differ in throughput rate, analog input range, and power consumption, so the replacement should be validated against the timing, signal-chain, and thermal budget of the target application before adoption.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492ARZ-5 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization accuracy is equivalent for signal-chain design. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | The AD7492ARZ-5 offers a higher maximum throughput, which matters when capturing faster analog signals or when more samples per unit time are required. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Both are single-channel devices, so channel count does not differentiate them for multiplexed or multi-signal applications. |
| Interface Type | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel (byte/word) | The interface differs fundamentally: the AD7495BRZ uses a serial bus while the AD7492ARZ-5 uses a parallel bus, which affects pin count, board routing, and microcontroller/FPGA glue logic. |
| Supply Voltage | 5 V (single supply) | 5 V (single supply) | Both operate from a 5 V single supply, so power-rail requirements are compatible between the two parts. |
| Analog Input Range | 0 V to VREF (2.5 V typical) | 0 V to VREF (2.5 V typical) | Identical input span means the same signal conditioning and reference design can be reused. |
| Reference | Internal 2.5 V reference | Internal 2.5 V reference | Both include an on-chip reference, simplifying system design and reducing external component count. |
| Package | 8-lead SOIC | 24-lead SOIC (wide) | The package footprint and pin count differ significantly, so a direct board drop-in replacement is not possible without layout changes. |
| Power Consumption | ~4.5 mW typical at 1 MSPS | ~15 mW typical at 1.25 MSPS | Lower power dissipation in the AD7495BRZ benefits battery-powered and thermally constrained designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature ratings mean both are suitable for the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492ARZ-5 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1.25M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | Internal |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7495BRZ is a 12-bit, 1 MSPS successive-approximation ADC with a serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, while the AD7492ARZ-5 is a 12-bit, 1.25 MSPS ADC with a parallel interface and an on-chip reference. The AD7495BRZ operates from a single 5 V supply and includes an internal reference, whereas the AD7492ARZ-5 is specified for 5 V operation with a parallel microprocessor interface.
Both devices provide 12-bit resolution, but their throughput differs. The AD7495BRZ is specified at 1 MSPS, while the AD7492ARZ-5 is specified at 1.25 MSPS. Designers should confirm timing and interface compatibility when considering either part for a given sampling rate.
The AD7495BRZ uses a serial interface compatible with SPI, QSPI, MICROWIRE, and DSP systems. The AD7492ARZ-5 uses a parallel interface intended for direct connection to microprocessors and DSPs. The interface difference is a primary factor in board layout and host controller selection.
No verified pin-for-pin or package compatibility should be assumed between the AD7495BRZ and AD7492ARZ-5. The AD7495BRZ is offered in an 8-lead SOIC package, while the AD7492ARZ-5 is offered in a 24-lead SOIC package. Pin functions, package dimensions, and PCB land patterns differ, so direct substitution is not supported without design validation.
The AD7495BRZ operates from a single 5 V supply and includes an internal reference. The AD7492ARZ-5 is specified for 5 V operation and also includes an on-chip reference. External reference options and exact reference specifications should be verified against the respective manufacturer datasheets before use in a design.
No. The two devices differ in package size, pin count, interface type (serial versus parallel), and specified throughput. A drop-in replacement is not supported; any substitution requires schematic, layout, timing, and firmware validation against the manufacturer datasheets.
The AD7495BRZ is generally suited to space-constrained designs that benefit from a serial interface and an 8-lead package. The AD7492ARZ-5 is generally suited to systems requiring a parallel interface for high-speed host connection. Final selection should be based on verified datasheet parameters, interface requirements, and board space constraints.