AD7495BRZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2494 PCS
- Package
- SOIC-8
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre AD7495BRZ e AD7492AR-REEL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD7495BRZ and AD7492AR-REEL are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible serial interface and similar resolution, making the AD7495BRZ a viable functional replacement candidate for the AD7492AR-REEL in many designs. However, the two parts differ in throughput rate, package footprint, and analog input configuration, so the replacement should be validated against the target application's timing, board layout, and signal-conditioning requirements before adoption.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492AR-REEL | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization step size and nominal dynamic range are equivalent. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | Maximum throughput determines the highest signal bandwidth that can be digitized; the AD7492 supports a higher conversion rate. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Channel count defines how many analog signals can be multiplexed into the converter without external switching. |
| Interface Type | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel (12-bit word) | The digital interface must match the host controller; serial vs parallel output changes pin count, board routing, and firmware. |
| Supply Voltage | 5 V single supply | 5 V single supply | Supply voltage must be compatible with the system rail and affects analog input range and logic levels. |
| Analog Input Range | 0 V to VREF (2.5 V internal reference) | 0 V to VREF (2.5 V internal reference) | Input span sets the full-scale voltage and must match the sensor or signal conditioning output swing. |
| Package / Mounting | 8-lead SOIC (surface mount) | 24-lead SOIC (surface mount) | Footprint and pin count affect PCB layout and whether a drop-in replacement is physically possible. |
| Power Consumption | ~10 mW typical at 1 MSPS | ~15 mW typical at 1.25 MSPS | Power budget and thermal considerations differ, which matters for portable or thermally constrained designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Both are specified over the industrial range, so environmental compatibility is equivalent. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492AR-REEL |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | - |
| Number of Inputs | 1 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI, DSP | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Number of A/D Converters | 1 | - |
| Architecture | SAR | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
| Operating Temperature | -40°C ~ 85°C | - |
The AD7495BRZ is a 12-bit successive-approximation ADC offered in an 8-lead SOIC package, while the AD7492AR-REEL is a 12-bit SAR ADC in a 24-lead SOIC package supplied on tape and reel. The AD7492AR-REEL integrates a 2.5 V reference and provides a parallel interface, whereas the AD7495BRZ provides a serial interface and requires an external reference. Designers should confirm package, interface, and reference requirements against the respective datasheets before selecting either part.
Both devices are 12-bit SAR ADCs. The AD7495BRZ offers a throughput rate of up to 1 MSPS, and the AD7492AR-REEL also provides up to 1 MSPS throughput. Resolution and speed are therefore comparable, but the interface, package, and reference architecture differ.
No, they are not drop-in replacements. The AD7495BRZ uses an 8-lead SOIC package with a serial interface, while the AD7492AR-REEL uses a 24-lead SOIC package with a parallel interface and an on-chip reference. Pin count, pin functions, PCB land pattern, and host interface logic all differ, so a redesign and validation are required before substitution.
The AD7495BRZ provides a serial SPI-compatible interface for connection to microcontrollers and DSPs. The AD7492AR-REEL provides a parallel interface for direct connection to a parallel bus. The choice depends on the host processor's available bus and board routing constraints.
The AD7492AR-REEL includes an internal 2.5 V reference, which reduces external component count. The AD7495BRZ requires an external reference voltage to be supplied by the user. Designs migrating between the two must account for this difference in reference circuitry and accuracy budgeting.
The AD7495BRZ is supplied in an 8-lead SOIC package. The AD7492AR-REEL is supplied in a 24-lead SOIC package on tape and reel for automated assembly. The suffix "REEL" indicates tape-and-reel packaging, which is relevant for high-volume pick-and-place production lines.
Both the AD7495BRZ and AD7492AR-REEL are specified for the industrial temperature range of -40°C to +85°C. Designers should still verify the exact grade and temperature specification on the manufacturer datasheet for the specific orderable part number.