AFE5832LPZAV
Texas Instruments
- Lifecycle
- Active
- Stock
- 6726 PCS
- Package
- NFBGA-289
- Series
- Acquisição de dados - Front End analógico (AFE)
Esta comparação detalhada entre AFE5832LPZAV e AFE5803ZCF fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AFE5832LPZAV and AFE5803ZCF are not drop-in replacements for one another. The AFE5832LPZAV is a 32-channel ultrasound analog front end in a 289-ball NFBGA package, while the AFE5803ZCF is an 8-channel device in a 135-ball NFBGA package, so channel count, package footprint, and pinout differ fundamentally. Designers must validate the system-level implications of these differences before considering either part in an existing layout.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE5832LPZAV | AFE5803ZCF | Why it matters |
|---|---|---|---|
| Number of Channels | 32 | 8 | Channel count determines how many transducer elements can be processed simultaneously, directly affecting imaging system architecture and scalability. |
| ADC Resolution | 12 bit | 14 bit | Higher ADC resolution improves dynamic range and image quality, which is critical for diagnostic ultrasound performance. |
| Maximum Sampling Rate | 80 MSPS | 65 MSPS | Sampling rate limits the maximum signal bandwidth and achievable axial resolution in the imaging chain. |
| Package / Case | 100-TQFP (14x14) | 100-NFBGA (9x9) | Package type and footprint affect PCB layout, thermal management, and mechanical fit in the system design. |
| Supply Voltage (Analog) | 1.8 V / 3.3 V | 1.8 V / 3.3 V | Supply rail requirements determine power supply design and compatibility with the rest of the board. |
| Interface Type | LVDS | LVDS | The digital output interface must match the FPGA or receiver to ensure reliable high-speed data transfer. |
| Operating Temperature Range | -40°C to +85°C | 0°C to +70°C | Temperature range determines suitability for industrial or medical environments and reliability margins. |
| Integrated CW Doppler | Yes | Yes | Continuous-wave Doppler support is essential for blood flow measurement in ultrasound systems. |
| Typical Power Consumption | ~1.1 W (per channel scaled) | ~0.9 W | Power consumption impacts thermal design and battery life in portable ultrasound equipment. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE5832LPZAV | AFE5803ZCF |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 10, 12 | 14 |
| Number of Channels | 32 | 8 |
| Power (Watts) | - | 190 mW |
| Voltage - Supply, Analog | - | 1.7V ~ 1.9V, 3.15V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 1.7V ~ 1.9V |
| Mounting Type | Surface Mount | Surface Mount |
The AFE5832LPZAV is a 32-channel, low-power analog front-end (AFE) designed for ultrasound systems, featuring a 12-bit ADC with a maximum sampling rate of 50 MSPS per channel and integrated continuous wave (CW) Doppler processing. The AFE5803ZCF is an 8-channel AFE with a 12-bit ADC operating up to 65 MSPS per channel, also targeting ultrasound applications but with a higher per-channel sampling rate and fewer channels. The AFE5832LPZAV emphasizes channel density and low power for portable systems, while the AFE5803ZCF emphasizes higher sampling speed per channel for applications requiring finer temporal resolution.
No. The AFE5832LPZAV is supplied in a 289-ball NFBGA package, while the AFE5803ZCF is supplied in a 100-ball NFBGA package. The ball counts, package dimensions, and pin assignments differ, so they are not drop-in replacements and require different PCB footprints and layout designs.
The AFE5832LPZAV integrates 32 receive channels in a single device, whereas the AFE5803ZCF integrates 8 receive channels. The AFE5832LPZAV is specifically marketed as a low-power variant, with per-channel power consumption designed to support high-channel-count portable ultrasound systems. The AFE5803ZCF, with fewer channels, is typically used in systems where 8 channels suffice and higher per-channel sampling rate is prioritized. Designers should consult the respective datasheets for exact power figures under specific operating conditions, as power scales with sampling rate, channel count, and CW Doppler usage.
The AFE5832LPZAV supports a maximum ADC sampling rate of 50 MSPS per channel. The AFE5803ZCF supports a maximum ADC sampling rate of 65 MSPS per channel. The higher sampling rate of the AFE5803ZCF may benefit applications requiring greater bandwidth or finer axial resolution, while the AFE5832LPZAV balances sampling rate with channel density and low power.
Yes. Both the AFE5832LPZAV and the AFE5803ZCF integrate CW Doppler processing blocks, which are used in ultrasound systems for blood flow velocity measurement. The implementation details, such as the number of CW channels and mixing architecture, differ between the two devices and should be verified in the respective datasheets for system-level design.
The AFE5832LPZAV is more suitable for portable, high-channel-count ultrasound systems because it integrates 32 channels in a single low-power device, reducing board space and system power compared to using multiple 8-channel AFEs. The AFE5803ZCF, with 8 channels and a higher per-channel sampling rate, is better suited to systems where channel count is lower and higher sampling speed is required.
No. The two devices differ in channel count (8 vs. 32), package (100-ball NFBGA vs. 289-ball NFBGA), maximum sampling rate (65 MSPS vs. 50 MSPS), and pin assignments. A direct replacement is not possible without redesigning the PCB, revalidating the signal chain, and confirming that the reduced channel count and different sampling rate meet the system requirements.